CNC Bender v12-20130710

v12-20130710 Back to CNC Bender Software Updates

See CNC Bender Customer Service Page for an update.

NEW: Skip Step Tolerance value in Main.axilist

The c:\cnc\config\axis\mail.axislist file contains a new value called "Skip Step Tolerance". This is a floating point value that is only considered positive. As of this version, the value is only effective for the bend axis. If the bend arm is within this value, then it will consider itself as being home (at zero), and will skip the move to zero to save time. The default value is 0.25. WARNING! Setting this value too high may cause the bend arm to never return Please do not attempt to adjust this value without technical assistance from an Advanced Tubular technician.

NEW: Added Bend Arm Home After Run Buttons

The bend arm will always home just after the run buttons are pressed. This behavior ensures that the bend arm does not drift outward and stay in the drifted position after the operator steps on the safety mat for loading the part. This feature helps in push bending, and in reducing clamp bending.

Other Pages

• Back to CNC Bender
• Back to CNC Bender Software Updates
• See CNC Bender Customer Service Page for an update.
• See CNC Bender General Information
• See Teach Mode
• See Custom Commands