CNC Bender v12-20120728

From ATTWiki
Revision as of 00:13, 7 August 2012 by Mcone (Talk | contribs)

Jump to: navigation, search

v12-20120728

Cncv12procontrol withteachmode.jpg


Check.jpg Enhanced HALT in Processor for Servo Motion

This version implements a stronger HALT in CNC Processor to be sure motion commands are halted during E-Stop. This will ensure that Processor does not continue to move the bender during an E-Stop type event.

Check.jpg Ceased Reporting Error for [BEGIN PROGRAM] Label

When this label was encountered in the Processor, any error would be reported in all cases. This has no value - so it is now ignored completely.

Check.jpg New Batch Converter - Cut Length to CSV Program

Build a single file filled with Cut Lengths from all the CNC part files in a folder

CNCBender BatchConverter CutLength2CSV.jpg

This CNC Bender utility program can extract the cut lengths from all the part files in a parts folder in batch mode.

The output file contains PART NAMES separated from CUT LENGTHS with a comma.

Other Pages