v12-20111222

Servo-controlled pressure die positioning is much more accurate and the motion is smoother.
This feature is especially useful for extreme accuracy during part capture. Parts can be accurately captured by the pressure die during PREBEND (Load), BENDING, and POSTBENDING (Unloading).

PreBend Options: PD Load Capture Position This feature allows you to move the pressure die to a position close to the bend die for load-capture.
Overall Options: PD Jog Position After Bends This feature allows you to open the pressure die slightly after a bend to relieve pressure before a mandrel pull.
Bending Options: PD Servo Retract Position This feature allows you to partially retract the pressure die during Multi-Bending and immediately after a bend.
PostBending Options: PD Unload Capture Position This feature allows you to partially retract the pressure die immediately after the last bend for unloading.

Several new PREBEND options allow for better control of the seam detect option in the Rotate Axis.
Added new COMDEF to set the seam detect rotate axis jog speed: Set Rotate Jog Speed.comdef
Added new HELP files to explain the new PREBEND seam detect options.
Added Sensor advance and retract COMDEFs (Seam Sensor

Importing older part files now brings the Tool data into memory also.
Older file imports no longer reset the bender name.
New COMDEFS were added:
- Set Rotate Jog Speed.comdef
- Seam Sensor Retract.comdef
- Seam Sensor Advance.comdef

New CIO objects were added:
- Output_SeamDetectSensor_Advance
- Output_SeamDetectSensor_Retract

New help files were added:
- Option_PrebendSeamDetectDegreesPerSecond.rtf
- Option_PrebendSeamDetectFeedAbsoluteSpeed.rtf
- Option_PrebendSeamDetectFeedAbsolutePosition.rtf
- ExternalFileToRunWhenPartChangesInProcessor.rtf

CNC Bender v12-20111222