CNC Bender v12-20111222

From ATTWiki
Revision as of 04:14, 23 December 2011 by Mcone (Talk | contribs)

Jump to: navigation, search

v12-20111222

Cncv12procontrol withteachmode.jpg

Check.jpg NEW - Servo-controlled PRESSURE DIE Motion

Manual page PD axis.jpg Manual page PD axis closeup.jpg

  • Servo-controlled pressure die positioning is much more accurate and the motion is smoother.

  • This feature is especially useful for extreme accuracy during part capture. Parts can be accurately captured by the pressure die during PREBEND (Load), BENDING, and POSTBENDING (Unloading).



Check.jpg NEW - Options for PD Servo Motion

PreBend Options: PD Load Capture Position

  • This feature allows you to move the pressure die to a position close to the bend die for load-capture.

Pd servo load capture.jpg

Overall Options: PD Jog Position After Bends

  • This feature allows you to open the pressure die slightly after a bend to relieve pressure before a mandrel pull.

Pd servo jog position after bends.jpg

Bending Options: PD Servo Retract Position

  • This feature allows you to partially retract the pressure die during Multi-Bending and immediately after a bend.

Pd servo retract postion.jpg

PostBending Options: PD Unload Capture Position

  • This feature allows you to partially retract the pressure die immediately after the last bend for unloading.

Pd servo unload capture.jpg

Check.jpg NEW - CNC Processor Builds a Part Name File in the LOGS Folder

  • When CNC Processor encounters a PART NAME command in the processor list, it now saves the part name to the a "cncprocessor_partname.log" file in the c:\cnc\logs folder.

  • This file contains only the part number, and can be accessed by any external process to allow the external process to know which part is currently running.

Check.jpg ENHANCED - Seam Find Detection Logic

Holedetect1.jpg

  • Several new PREBEND options allow for better control of the seam detect option in the Rotate Axis.

  • Added new COMDEF to set the seam detect rotate axis jog speed: Set Rotate Jog Speed.comdef

  • Added new HELP files to explain the new PREBEND seam detect options.

  • Added Sensor advance and retract COMDEFs (Seam Sensor

Holedetect2.jpg

Check.jpg Other

  • Importing older part files now brings the Tool data into memory also.

  • Older file imports no longer reset the bender name.

  • New COMDEFS were added:
    • Set Rotate Jog Speed.comdef
    • Seam Sensor Retract.comdef
    • Seam Sensor Advance.comdef

  • New CIO objects were added:
    • Output_SeamDetectSensor_Advance
    • Output_SeamDetectSensor_Retract

  • New help files were added:
    • Option_PrebendSeamDetectDegreesPerSecond.rtf
    • Option_PrebendSeamDetectFeedAbsoluteSpeed.rtf
    • Option_PrebendSeamDetectFeedAbsolutePosition.rtf
    • ExternalFileToRunWhenPartChangesInProcessor.rtf

  • This help file was updated:
    • Option_PrebendSeamDetectMode.rtf

Other Pages