Difference between revisions of "CNC Bender v12-20111222"

From ATTWiki
Jump to: navigation, search
(25px Other)
(25px Other)
Line 104: Line 104:
 
**PD Servo Absolute And PDA Output Home
 
**PD Servo Absolute And PDA Output Home
  
 +
* COMDEF Names Changed
 +
** PressureDieBoostToHome to "PD Output PDA Output Home"
 +
** Pressure Die and PDA Motion Home to "PD Output and PDA Servo Home"
  
  
 
* New help files were added:
 
* New help files were added:
** Option_PrebendSeamDetectDegreesPerSecond.rtf
+
** PDMode.rtf
** Option_PrebendSeamDetectFeedAbsoluteSpeed.rtf
+
** PDServoFixedClosedPosition.rtf
** Option_PrebendSeamDetectFeedAbsolutePosition.rtf
+
** PDServoLoadCapturePosition.rtf
** ExternalFileToRunWhenPartChangesInProcessor.rtf<br><br>
+
** PDServoRetractPosition.rtf
 +
** PDServoUnloadCapturePosition.rtf
  
* This help file was updated:
 
** Option_PrebendSeamDetectMode.rtf
 
  
 
</td>
 
</td>

Revision as of 04:22, 23 December 2011

v12-20111222

Cncv12procontrol withteachmode.jpg

Check.jpg NEW - Servo-controlled PRESSURE DIE Motion

Manual page PD axis.jpg
Manual page PD axis closeup.jpg

  • Servo-controlled pressure die positioning is much more accurate and the motion is smoother.

  • This feature is especially useful for extreme accuracy during part capture. Parts can be accurately captured by the pressure die during PREBEND (Load), BENDING, and POSTBENDING (Unloading).



Check.jpg NEW - Options for PD Servo Motion

PreBend Options: PD Load Capture Position

  • This feature allows you to move the pressure die to a position close to the bend die for load-capture.

Pd servo load capture.jpg

Overall Options: PD Jog Position After Bends

  • This feature allows you to open the pressure die slightly after a bend to relieve pressure before a mandrel pull.

Pd servo jog position after bends.jpg

Bending Options: PD Servo Retract Position

  • This feature allows you to partially retract the pressure die during Multi-Bending and immediately after a bend.

Pd servo retract postion.jpg

PostBending Options: PD Unload Capture Position

  • This feature allows you to partially retract the pressure die immediately after the last bend for unloading.

Pd servo unload capture.jpg



Check.jpg Other

  • A new Low Level PD Mode option allows the Pressure Die to be treated as a standard output actuator or a servo axis.

  • Pressure Die COMDEFs were added:
    • PD Servo Absolute
    • PD Servo Incremental Positive
    • PD Servo And Clamp Output And PDA Output Home
    • PD Servo Absolute And PDA Output Home
    • PD Servo Absolute And Clamp Output Home
    • PD Servo Find Home
    • PD Servo Reset Position
    • PD Servo Absolute and PDA Servo Absolute
    • PD Servo Absolute And PDA Output Home
  • COMDEF Names Changed
    • PressureDieBoostToHome to "PD Output PDA Output Home"
    • Pressure Die and PDA Motion Home to "PD Output and PDA Servo Home"


  • New help files were added:
    • PDMode.rtf
    • PDServoFixedClosedPosition.rtf
    • PDServoLoadCapturePosition.rtf
    • PDServoRetractPosition.rtf
    • PDServoUnloadCapturePosition.rtf


Other Pages