Difference between revisions of "CNC Bender v12-20101116"

From ATTWiki
Jump to: navigation, search
Line 19: Line 19:
 
<tr valign=top>
 
<tr valign=top>
 
<td width=200>
 
<td width=200>
The absolute rotate command is highly optimized to rotate the spindle when the feed carriage is moving away from the part during the last bend.  This programmed delay ensures that the chuck is off the part before rotating.  (This is especially important for non-cylindrical tubes.)<br><br>
+
The absolute rotate command is highly optimized to rotate the spindle when the feed carriage is moving away from the part during the last bend.  This programmed delay ensures that the chuck is off the part before rotating.  (This is especially important for non-cylindrical tubes.)
 +
<br><br>
 
The new command is found in Prebending options.
 
The new command is found in Prebending options.
 +
<br><br>
 +
A value of zero will disable the delay.
 
</td>
 
</td>
 
<td>
 
<td>
[image:absoluteprerotatedelay.jpg|350px]]
+
][image:absoluteprerotatedelay.jpg|350px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 17:12, 16 November 2010

Cncv12procontrol withteachmode.jpg

Contents



Check.jpg NEW - Absolute Pre-Rotate Delay

The absolute rotate command is highly optimized to rotate the spindle when the feed carriage is moving away from the part during the last bend. This programmed delay ensures that the chuck is off the part before rotating. (This is especially important for non-cylindrical tubes.)

The new command is found in Prebending options.

A value of zero will disable the delay.

][image:absoluteprerotatedelay.jpg|350px]]

Other Pages