CNC Bender v12-20101005

From ATTWiki
Revision as of 14:01, 7 October 2010 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Cncv12procontrol withteachmode.jpg

Contents


Check.jpg NEW - LOAD and START in RUN PAGE

The LOAD and START values can now be programmed in the RUN PAGE.

Loadstart runpage.jpg

Check.jpg NEW - FEED AXIS POSITION DISPLAY FROM BACK OR FRONT

The FEED axis values can be displayed from the front or the back by pressing a toggle button in the RUN PAGE.

This changes all FEED Position values displayed in CNC Bender.

Feeddatum change.jpg

Check.jpg NEW - FEED TORQUE ZEROED DURING MANDREL RETRACT

The FEED TORQUE is now set to ZERO% during mandrel retractions. This prevents possible destruction of the FEED gearbox, rack, pinion, chain, if the tube breaks during bending and the mandrel pulls the tube and carriage back.

Other Pages