Difference between revisions of "CNC Bender v12-20100414"

From ATTWiki
Jump to: navigation, search
 
Line 8: Line 8:
 
<tr>
 
<tr>
 
<td>
 
<td>
Type of Upgrade: Minor Upgrade
+
Upgrade Involves: Benderlink
 
</td>
 
</td>
 
<td>
 
<td>

Revision as of 02:37, 15 April 2010

Cncv12procontrol withteachmode.jpg

Upgrade Involves: Benderlink

Benderlink debug

V12mainmenu.jpg

Contents


Check.jpg REPAIRED - Benderlink Database Transfer

The CNC Bender database was corrupted when Benderlink users pressed the "Apply and Close" button without first having made a correction. The result was a CNC Bender setup that would cause major issues in CNC Bender.

This issue has been corrected by automatically updating the Adjusted database when Benderlink shows on the screen. There is no possibility that the the setup database can now be cleared;

Check.jpg REPAIRED - Single Radius Carriage Shifting

Single radius carriage shifting is now re-enabled in this version.


Check.jpg REPAIRED - Direct Axes Jog Buttons

If the Immediate Message box displays while an operator is pressing a JOG+ or JOG- button in direct axes jog mode, then CNC Bender would never allow the jog button to come up.

This has been resolved.


Check.jpg CHANGE - Help Files

We changed the help files for the Feed % Adjustment (in the tool page) and the Feed Speed % Adjustment (in the bend cells of the FRB page) to remove any confusion over the purpose of each option and how they work together.

  • The Feed % Adjustment (tool page) changes the distance the Feed axis travels during Feed-Bending.

  • The Feed Speed % Adjustment (bend cells in the FRB page) changes the speed the Feed axis travels during Feed-Bending.



Other Pages