CNC Bender v12-20100303

From ATTWiki
Revision as of 21:58, 3 March 2010 by Mcone (Talk | contribs)

Jump to: navigation, search

Cncv12procontrol withteachmode.jpg

Type of Upgrade: Significant Upgrade

Benderlink is significantly improved

V12mainmenu.jpg

Contents


Check.jpg IMPROVED - New BENDERLINK Features Make Data Transfer Easier Than Ever

Benderlink is now part of CNC Bender and is available as a sub-menu to the FRB page. It has support for Eaton Leonard VECTOR and ROMER Supravision Nework protcols.

Benderlink is an add-on feature to CNC Bender ProControl and LiteControl software packages.

Frb newbenderlinkbutton.jpg

The most powerful addition is the new COMPARE feature. You can compare and edit data that was received from the measuring center before it is accepted for use inside CNC Bender Pre-Bending and FRB pages.

Apply the data to the main database after you give it final approval:

Benderlink apply.jpg

Or you can just press "Close" to skip the transfer.

Benderlink compare.jpg

Benderlink bytecount.jpg

Any ADJUST value can be edited before sending the data to CNC Bender.

New BYTE COUNTERS clearly show any activity in real-time


Benderlink compareedit.jpg



Check.jpg We've changed the Licensing Method for Benderlink, Push Bending, and PDA Realtime Variable Gearing

Now these three options have their own program ID in dongles. If the IDs are present in the dongle, then these features are enabled (or allowed to be enabled) automatically.

This helps us manage licenses for these features and allows us to enable these features more quickly with an e-mailed file if you add them to your bender control.

Hasp hl pro.jpg

Other Pages