Difference between revisions of "CNC Bender v12-20100105"

From ATTWiki
Jump to: navigation, search
 
Line 2: Line 2:
 
<tr>
 
<tr>
 
<td width=300>
 
<td width=300>
[[image:Cncbender_logo_pushbending.png]]
+
[[image:cncbender_logo.jpg|300px]]
 
<br>
 
<br>
  

Revision as of 15:04, 18 January 2010

Cncbender logo.jpg

Type of Upgrade: MAJOR VERSION CHANGE with Teach Mode

The changes in this version take CNC Bender to the next step in setup power: TEACH your bender how to solve problems.

Operatorstation model.jpg

Contents


Check.jpg NEW - "Robot Clear" Protection

  • CNC Bender can now watch - in real-time - for a "robot clear" input point and block a programmable list of motion if the robot is not clear of the bender.

  • The robot clear input must be HIGH when the robot is clear of the bender.

  • The setup for the feature is in the CNCProcessor.cfg file. The setup includes two lists: 1 - a list of modules to block, and 2 - a list of CIO outputs to block.

Fanucrobot.jpg
Genoption robotclear.jpg

  • When the robot is in the bender and no motion command is being sent to CNC Processor, the interface shows "Robot in Bender".

Robotinbender closeup.jpg


Robotinbender.jpg

  • When the robot is in the bender and motion is being blocked, the interface shows "Waiting for Robot to Clear - Blocking Motion"

  • When the robot is clear - the motion continues automatically.

Waitingforrobotclear closeup.jpg

Waitingforrobotclear.jpg




Check.jpg ENHANCE - Energize Dies Home Dialog - OFF or ON

  • The Energize Dies Home dialog can be switched off in the low level. OFF is now recommended for advanced users.

Genoption energizedieshome dialog.jpg

Energizedieshome dialog.jpg




Other Pages