Difference between revisions of "CNC Bender v11-20090408"

From ATTWiki
Jump to: navigation, search
(25px CHANGE - To Mandrel Early Advance in Prebend Logic)
(25px CHANGE - Added "RETURN" before "Angle" in "Early Mandrel Forward At Angle")
 
(12 intermediate revisions by one user not shown)
Line 5: Line 5:
  
  
===[[image:Check.jpg|25px]] ENHANCED - Moved MANDREL CYLINDER ENABLE option from OVERALL to BEND Rows and RENAMED ===
+
===[[image:Check.jpg|25px]] ENHANCED - The MANDREL CYCLE is now Handled PER BEND ===
  
This change allows the mandrel to be switched ON or OFF individually for any bend row rather than for every bend row.
+
This change allows the mandrel to be switched ON or OFF individually for any bend row rather than for the entire part. The option was moved from OVERALL section to the BEND options of the FRB section.
<br><br>
+
The option was MOVED and RENAMED to "MANDREL <b>CYCLE</b> ENABLE" because we cannot no longer anticipate that all mandrel actuators will be cylinders.  For example, it is possible that we may use geared electric servo motors for the mandrel.
+
 
<br><br>
 
<br><br>
 
This new PER BEND feature is critical for mandrels in rectangular or square tubing that rotate 90 degrees, but the mandrel can only bend in one of the two planes.
 
This new PER BEND feature is critical for mandrels in rectangular or square tubing that rotate 90 degrees, but the mandrel can only bend in one of the two planes.
 
<br><br>
 
<br><br>
[[image:bendoptions_mandrelcylinder_v11-20090408.jpg|500px]]
+
[[image:bendoptions_mandrel_titlechange.jpg|500px]]
 
<br><br>
 
<br><br>
This is the option list with the new title'''Cylinder''' is changed to '''Cycle''':
+
When loading older CNC Bender part files, the new Bend row mandrel option will always be set to OFFTo set the mandrel ON in every row, set the value to ON in one row, then press the "Copy Value to All Rows" button.
 +
<br><br>
 +
<br><br>
 +
 
 +
===[[image:Check.jpg|25px]] ENHANCED - MANDREL CYLINDER ENABLE renamed MANDREL CYCLE ENABLE===
 +
The option was RENAMED to "MANDREL <b>CYCLE</b> ENABLE" because we cannot no longer anticipate that all mandrel actuators will be cylinders.  For example, it is possible that we may use servo motors for the mandrel.
 
<br><br>
 
<br><br>
 
[[image:bendoptions_mandrel_titlechange.jpg|500px]]
 
[[image:bendoptions_mandrel_titlechange.jpg|500px]]
 
<br><br>
 
<br><br>
When loading older CNC Bender part files, the new Bend row mandrel option will always be set to OFF.  To set the mandrel ON in every row, set the value to ON in one row, then press the "Copy Value to All Rows" button.
 
 
<br><br>
 
<br><br>
 
  
 
===[[image:Check.jpg|25px]] CHANGE - Added "RETURN" before "Angle" in "Early Mandrel Forward At Angle"===
 
===[[image:Check.jpg|25px]] CHANGE - Added "RETURN" before "Angle" in "Early Mandrel Forward At Angle"===
  
This option title change to "Early Mandrel Forward at Return Angle" removes an ambiguity on when this feature will take effect.  The word "Return" indicates that it happens when the bend arm is RETURNING to setup for the next row.
+
This option title change to "Early Mandrel Forward at Return Angle" removes an ambiguity on '''when''' this feature will take effect.  The word "Return" indicates that it happens when the bend arm is RETURNING to setup for the next row.
 
<br><br>
 
<br><br>
 
[[image:bendoptions_early_mandrel_forward_returnangle.jpg|500px]]
 
[[image:bendoptions_early_mandrel_forward_returnangle.jpg|500px]]
 +
<br><br>
 +
<br><br>
  
 
===[[image:Check.jpg|25px]] CHANGE - To Mandrel Early Advance in Prebend Logic ===
 
===[[image:Check.jpg|25px]] CHANGE - To Mandrel Early Advance in Prebend Logic ===

Latest revision as of 14:12, 14 April 2009

Cncbender logo pushbending.png

Operatorstation model.jpg

Contents


Check.jpg ENHANCED - The MANDREL CYCLE is now Handled PER BEND

This change allows the mandrel to be switched ON or OFF individually for any bend row rather than for the entire part. The option was moved from OVERALL section to the BEND options of the FRB section.

This new PER BEND feature is critical for mandrels in rectangular or square tubing that rotate 90 degrees, but the mandrel can only bend in one of the two planes.

Bendoptions mandrel titlechange.jpg

When loading older CNC Bender part files, the new Bend row mandrel option will always be set to OFF. To set the mandrel ON in every row, set the value to ON in one row, then press the "Copy Value to All Rows" button.



Check.jpg ENHANCED - MANDREL CYLINDER ENABLE renamed MANDREL CYCLE ENABLE

The option was RENAMED to "MANDREL CYCLE ENABLE" because we cannot no longer anticipate that all mandrel actuators will be cylinders. For example, it is possible that we may use servo motors for the mandrel.

Bendoptions mandrel titlechange.jpg



Check.jpg CHANGE - Added "RETURN" before "Angle" in "Early Mandrel Forward At Angle"

This option title change to "Early Mandrel Forward at Return Angle" removes an ambiguity on when this feature will take effect. The word "Return" indicates that it happens when the bend arm is RETURNING to setup for the next row.

Bendoptions early mandrel forward returnangle.jpg



Check.jpg CHANGE - To Mandrel Early Advance in Prebend Logic

Now the Mandrel Early Advance is activated only if the MANDREL CYCLE ENABLE is ON in the first bend row. (See above)

Prebendoptions mandrelearlyadvance.jpg



Check.jpg ENHANCE - New Remark in Processlist For Mandrel Retract Override

To aid in processlist logic diagnostics, the processlist builder now includes a special message in the PREBEND section of the processslist when these mandrel cycle conditions exist:

  • The MANDREL TYPE is anything other than NONE (In the Low Level)
  • The HOLD MANDREL FORWARD setting is ENABLED in the LAST BEND ROW.


When these two conditions are true, then Mandrel Retract is ALWAYS SKIPPED in the PREBEND section of the processlist. To remind operators of this effect caused by the two option settings, we now insert two remarks in the processlist where the MandrelRetract command would have been inserted:

// ** MANDREL RETRACT OVERRIDE: "Hold Mandrel Forward" setting is ON in the last Bend. **

// ** MANDREL RETRACT OVERRIDE: The mandrel retract is NOT inserted. **



Other Pages