Difference between revisions of "CNC Bender v11-20090126"

From ATTWiki
Jump to: navigation, search
(25px ENHANCE - Adjust General Dynamic Option Name)
(25px ENHANCE - Adjust General Dynamic Option Name)
Line 10: Line 10:
 
The Low Level names of dynamic options "Feed Torque Safe High" and "Feed Torque Safe Low" were adjusted for clarification.
 
The Low Level names of dynamic options "Feed Torque Safe High" and "Feed Torque Safe Low" were adjusted for clarification.
 
<br><br>
 
<br><br>
The new names include "Feed-Bend" inserted in the beginning to be sure users understand that these values are used by the Processlist Builder to limit the feed axis torque during Feed-Bending only.  These values have no effect on the torque of the feed axis at any other time.
+
The new names include "Feed-Bend" inserted in the beginning to be sure users understand that these values are used by the Processlist Builder to limit the feed axis torque during Feed-Bending only.  '''''These values have no effect on the torque of the feed axis at any other time.'''''
 
<br><br>
 
<br><br>
 
These are the options before the change:
 
These are the options before the change:

Revision as of 20:37, 26 January 2009

Cncbender logo pushbending.png

Operatorstation model.jpg



Check.jpg ENHANCE - Adjust General Dynamic Option Name

The Low Level names of dynamic options "Feed Torque Safe High" and "Feed Torque Safe Low" were adjusted for clarification.

The new names include "Feed-Bend" inserted in the beginning to be sure users understand that these values are used by the Processlist Builder to limit the feed axis torque during Feed-Bending only. These values have no effect on the torque of the feed axis at any other time.

These are the options before the change:

Cnc torque limit options1.jpg

These are the options after the change:

Cnc torque limit options2.jpg

When upgrading to this version, it is important to remember to restore the dynamic options in low level in order to see this change.

Other Pages