Benderlink for SolidWorks 2.0

From ATTWiki
Revision as of 13:07, 22 April 2008 by Mcone (Talk | contribs)

Jump to: navigation, search

Blinkswlogo.jpg

Solidworkslogo.png

Contents


Check.jpg New - Now Handles Bends 180 Degrees or Greater

Benderlink now automatically detects bends that have an angle of 180 degrees or more then performs a bisection into two smaller bend angles. This overcomes the problem of an intersection point at an unsolvable intersection by creating two intersection points with two bends where there was one.

Blinksw v2 sw180 2.jpg

Blinksw v2 sw180 3.jpg


This image shows the result of a bend being split into two adjacent bends. This part was drawn with a single large-angle bend in SolidWorks, then imported into Benderlink, and displayed in TubeCalc:

Blinksw v2 sw180 splitdemo.jpg


Check.jpg New - Automatic Combination of Two Adjacent Bends For Bender Data

Since Benderlink can now handle bend angles of 180 degree bends or greater, it is now also able to recombine adjacent bends from the centerline into single bends in the bend data.


Check.jpg Repair - TAURING Data Includes Straight Distances

Benderlink for SolidWorks now includes the straights in the TAURING bender data.

Blinksw v2 TauringData.jpg




Other Pages