Difference between revisions of "Benderlink for SolidWorks 1.9"

From ATTWiki
Jump to: navigation, search
Line 8: Line 8:
 
===[[image:Check.jpg|25px]] New - Export TAURING Data Feature ===
 
===[[image:Check.jpg|25px]] New - Export TAURING Data Feature ===
  
[[image:Blinksw_export_tauring_data_menu_closeup.jpg|500px]]
+
[[image:Blinksw_export_tauring_data_menu_closeup.jpg|400px]]
  
 
Benderlink for SolidWorks can now output a text file that contains TAURING bender data.<br>
 
Benderlink for SolidWorks can now output a text file that contains TAURING bender data.<br>

Revision as of 20:37, 4 April 2008

Blinkswlogo.jpg

Solidworkslogo.png

Contents



Check.jpg New - Export TAURING Data Feature

Blinksw export tauring data menu closeup.jpg

Benderlink for SolidWorks can now output a text file that contains TAURING bender data.

The editor follows the same rules as the Bend Reduction Editor. The only difference is that the output from the formula inside the Springback Compensation Editor is used to adjust the bend angle in order to compensate for springback during bender. This is a sample page of the Springback Compensation Editor:
Blinksw springbackeditor.jpg

Check.jpg New - Springback Compensation Formula Values

This window allows you to enter the FIXED and PROPORATIONAL values of the springback formula. These values can be used in the Springback Compensation Editor formula to calculate overbend necessary to overcome springback during bending. The values are also used to shorten straights that follow the bends during overbending.

Blinksw springback values.jpg

The values can be calculated using the include Overbend Calculator software.

Overbend bendersetup.jpg

The standard springback compensation formula is:

New Bend Angle = ((Theoretical Bend Angle * Proportional) + Fixed)


Check.jpg New - Compensation State Switches

Blinksw compensationstate active.jpg

The compensation state of Benderlink can be switched ENABLED or DISABLED depending on the application. For example, when sending new data to the bender, the compensation calculations can be active. When performing corrections, they are typically inactive.

Blinksw compensationstate inactive.jpg



Other Pages