Difference between revisions of "Benderlink for SolidWorks 1.8"

From ATTWiki
Jump to: navigation, search
Line 17: Line 17:
 
<br>
 
<br>
 
<br>
 
<br>
 +
[[image:blinksw_1_8_springbackeditor.jpg|500px]]
 +
 
<br>
 
<br>
  

Revision as of 19:52, 24 March 2008

Blinkswlogo.jpg

Solidworkslogo.png

Contents



Check.jpg New - Springback Compensation Editor Feature

Blinksw 1 8 pulldown.jpg

Benderlink for SolidWorks now allows operators to program their Springback Compensation formula into the program using the Springback Compensation Editor.

The editor follows the same rules as the Bend Reduction Editor. The only difference is that the output from the formula inside the Springback Compensation Editor is used to adjust the bend angle in order to compensate for springback during bender.



500px


Check.jpg Redesigned - Send Data To Bender Menu

Objects have been re-arranged in the menus to allow for more logical placement on the screen in Benderlink. Objects have been removed this menu for simplification. Also: A new "Current Bender Number" label is added to help quickly identify which bender is being communicated with.

Blinksw senddatatobender menu.jpg



Check.jpg New - SVNET Setup Menu

Objects have been re-arranged in the menus to allow for more logical placement on the screen in Benderlink. Objects have been moved new SVNET Setup menu

There are three sub-menus in the SVNET menu:

  1. Network Path - Setup for the common SVNET path for communications
  2. Client - Setup for features where Benderlink calls out to the bender or sends data to the bender.
  3. Server - Setup for Benderlink's ability to respond to commands from the bender.



Blinksw svnet networkpath setup.jpg

Blinksw svnet client setup.jpg

Blinksw svnet server setup.jpg


Other Pages