Difference between revisions of "Benderlink for SolidWorks 1.73"

From ATTWiki
Jump to: navigation, search
(25px New - Reduce the LAST Length with Bend Reduction)
(25px New - Bend Reduction Formula Editor)
Line 20: Line 20:
  
  
===[[image:Check.jpg|25px]] New - Bend Reduction Formula Editor ===
+
===[[image:Check.jpg|25px]] New - Two Save Buttons ===
  
[[image:Blinksw_bendreductionfunction_pullmenu.jpg|500px]]
+
[[image:blinksw_twosavebuttons.jpg|500px]]
  
Predicting elongation in a tube shape requires complex mathematics that changes per customer application.  Benderlink for SolidWorks now allows operators to program their Bend Reduction formula into the program. This is the Bend Reduction Function editor:
+
We've added two save buttons rather than one in order to skip the modal dialog that required a choice for which type of data you were saving.<br>
<br>
+
<br>
+
[[image:Blinksw_bendreductionfunction_menu.jpg|500px]]
+
<br>
+
<br>
+
 
+
Read details about the editor here: [[Bend Reduction Editor]]
+
 
<br>
 
<br>
 +
[[image:blinksw_twosavebuttons.jpg|500px]]
 
<br>
 
<br>
 
<br>
 
<br>

Revision as of 02:10, 11 March 2008

Blinkswlogo.jpg

Solidworkslogo.png

Contents


Check.jpg New - Reduce the LAST Length with Bend Reduction

Benderlink for SolidWorks now also reduces the last length of tube in the bender data.

Check.jpg New - Swap Ends

New pulldown menus are added to Benderlink for SolidWorks that allows you to swap the tube end for end. Both the MASTER and INSPECTED data can be swapped.

Blinksw toolmenu.jpg

When the swap occurs, the Bend Reduction formula is used to recalculate the length reduction at the other end of the tube.


Check.jpg New - Two Save Buttons

Blinksw twosavebuttons.jpg

We've added two save buttons rather than one in order to skip the modal dialog that required a choice for which type of data you were saving.

Blinksw twosavebuttons.jpg

Check.jpg Redesigned - Send Data To Bender Menu

Objects have been re-arranged in the menus to allow for more logical placement on the screen in Benderlink. Objects have been removed this menu for simplification. Also: A new "Current Bender Number" label is added to help quickly identify which bender is being communicated with.

Blinksw senddatatobender menu.jpg



Check.jpg New - SVNET Setup Menu

Objects have been re-arranged in the menus to allow for more logical placement on the screen in Benderlink. Objects have been moved new SVNET Setup menu

There are three sub-menus in the SVNET menu:

  1. Network Path - Setup for the common SVNET path for communications
  2. Client - Setup for features where Benderlink calls out to the bender or sends data to the bender.
  3. Server - Setup for Benderlink's ability to respond to commands from the bender.



Blinksw svnet networkpath setup.jpg

Blinksw svnet client setup.jpg

Blinksw svnet server setup.jpg


Other Pages