Difference between revisions of "Benderlink for BLM Revisions"

From ATTWiki
Jump to: navigation, search
(image:Gears_view_small.png Benderlink for BLM - Third Quarter - 2013)
(image:Gears_view_small.png Benderlink for BLM - Third Quarter - 2015)
 
(22 intermediate revisions by one user not shown)
Line 1: Line 1:
  
 
Back to [[Benderlink for BLM]]
 
Back to [[Benderlink for BLM]]
 +
 +
==== [[image:Gears_view_small.png]] Benderlink for BLM - Third Quarter - 2015====
 +
 +
<table cellpadding="5" width="700">
 +
<tr>
 +
<td width="150">October 14, 2015</td>
 +
<td width="250">[[Revision: Benderlink for BLM 5.3]]</td>
 +
<td width="200">
 +
*Fixed radius level issue that could stop corrections loops
 +
*Allowed corrections to ignore end length corrections
 +
*Enhanced Communications to work with new Windows version of LASERVISION
 +
*Fixed Ping port capability for newer Windows
 +
*Added timed message if port to measuring center cannot open
 +
</td>
 +
<td>[[image:benderlinkblm_v5.3_screen.png|150px]]</td>
 +
</tr>
 +
</table>
  
 
==== [[image:Gears_view_small.png]] Benderlink for BLM - Third Quarter - 2013====
 
==== [[image:Gears_view_small.png]] Benderlink for BLM - Third Quarter - 2013====
 +
 +
<table cellpadding="5" width="700">
 +
<tr>
 +
<td width="150">August 2, 2013</td>
 +
<td width="250">[[Revision: Benderlink for BLM 5.2]]</td>
 +
<td width="200">
 +
*Builds Supravision file with partname during every Supravision file import conversion in the FILE MENU.
 +
</td>
 +
<td>[[image:blinkblm_v5_screen.jpg|150px]]</td>
 +
</tr>
 +
</table>
 +
 +
<table cellpadding="5" width="700">
 +
<tr>
 +
<td width="150">July 31, 2013</td>
 +
<td width="250">[[Revision: Benderlink for BLM 5.1]]</td>
 +
<td width="200">
 +
*Builds Supravision file with partname during every conversion
 +
</td>
 +
<td>[[image:blinkblm_v5_screen.jpg|150px]]</td>
 +
</tr>
 +
</table>
  
 
<table cellpadding="5" width="700">
 
<table cellpadding="5" width="700">
 
<tr>
 
<tr>
 
<td width="150">July 20, 2013</td>
 
<td width="150">July 20, 2013</td>
<td width="200">[[Revision: Benderlink for BLM 5]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 5]]</td>
<td width="200">Add reverse rotation switch, enhanced conversion process, added new style of hardware key, changed user interface</td>
+
<td width="200">
 +
*Add reverse rotation switch
 +
*Adjusted conversion process
 +
*Added new style of hardware key
 +
*Adjusted user interface</td>
 
<td>[[image:blinkblm_v5_screen.jpg|150px]]</td>
 
<td>[[image:blinkblm_v5_screen.jpg|150px]]</td>
 
</tr>
 
</tr>
Line 18: Line 61:
 
<tr>
 
<tr>
 
<td width="150">September 11, 2009 </td>
 
<td width="150">September 11, 2009 </td>
<td width="200">[[Revision: Benderlink for BLM 4.03]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 4.03]]</td>
<td width="200">*No longer disable controls during communication
+
<td width="200">
 +
*No longer disable controls during communication
 
*Removed shutdown bug.
 
*Removed shutdown bug.
 
</td>
 
</td>
Line 31: Line 75:
 
<tr>
 
<tr>
 
<td width="150">May 18, 2009</td>
 
<td width="150">May 18, 2009</td>
<td width="200">[[Revision: Benderlink for BLM 4.02]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 4.02]]</td>
<td width="200">*Allow Benderlink to disable audio messages
+
<td width="200">
 +
*Allow Benderlink to disable audio messages
 
*Repaired some minor shutdown issues
 
*Repaired some minor shutdown issues
 
</td>
 
</td>
Line 42: Line 87:
 
<tr>
 
<tr>
 
<td width="150">April 13, 2009</td>
 
<td width="150">April 13, 2009</td>
<td width="200">[[Revision: Benderlink for BLM 4]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 4]]</td>
<td width="200">*New Interface which includes, new LEDs, new LOAD and MERGE buttons, new Date/Time stamps
+
<td width="200">
 +
*New Interface which includes, new LEDs, new LOAD and MERGE buttons, new Date/Time stamps
 
*New Adjust Data Window to adjust the YBC data before sending to the bender
 
*New Adjust Data Window to adjust the YBC data before sending to the bender
 
*Completely rewritten HELP and MANUAL to include 100 pages of detail
 
*Completely rewritten HELP and MANUAL to include 100 pages of detail
Line 52: Line 98:
 
</table>
 
</table>
  
 
+
==== [[image:Gears_view_small.png]] Benderlink for BLM - First Quarter - 2009====
==== [[image:Gears_view_small.png]] Benderlink for BLM - FirstQuarter - 2009====
+
  
 
<table cellpadding="5" width="700">
 
<table cellpadding="5" width="700">
 
<tr>
 
<tr>
 
<td width="150">Februrary 19, 2009</td>
 
<td width="150">Februrary 19, 2009</td>
<td width="200">[[Revision: Benderlink for BLM 3.5]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 3.5]]</td>
<td width="200">*New dialogs that suggest when BLM files should be saved
+
<td width="200">
 +
*New dialogs that suggest when BLM files should be saved
 
*Added a pulldown menu
 
*Added a pulldown menu
 
*Removed all automatic BLM Data File Overwrites to let the user choose
 
*Removed all automatic BLM Data File Overwrites to let the user choose
Line 70: Line 116:
 
<tr>
 
<tr>
 
<td width="150">Februrary 3, 2009</td>
 
<td width="150">Februrary 3, 2009</td>
<td width="200">[[Revision: Benderlink for BLM 3.4]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 3.4]]</td>
 
<td width="200">
 
<td width="200">
 
*Allow to always set internal part number to external filename
 
*Allow to always set internal part number to external filename
Line 78: Line 124:
 
</tr>
 
</tr>
 
</table>
 
</table>
 
  
 
==== [[image:Gears_view_small.png]] Benderlink for BLM - Fourth Quarter - 2007====
 
==== [[image:Gears_view_small.png]] Benderlink for BLM - Fourth Quarter - 2007====
Line 85: Line 130:
 
<tr>
 
<tr>
 
<td width="150">December 7, 2007</td>
 
<td width="150">December 7, 2007</td>
<td width="200">[[Revision: Benderlink for BLM 3.2]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 3.2]]</td>
 
<td width="200">
 
<td width="200">
 
*Allow User to choose units being sent to the Supravision measuring center
 
*Allow User to choose units being sent to the Supravision measuring center
Line 97: Line 142:
 
<tr>
 
<tr>
 
<td width="150">December 6, 2007</td>
 
<td width="150">December 6, 2007</td>
<td width="200">[[Revision: Benderlink for BLM 3.1]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 3.1]]</td>
 
<td width="200">
 
<td width="200">
 
*Confirm overwrites of BLM data files
 
*Confirm overwrites of BLM data files
Line 110: Line 155:
 
<tr>
 
<tr>
 
<td width="150">October, 2007</td>
 
<td width="150">October, 2007</td>
<td width="200">[[Revision: Benderlink for BLM 3]]</td>
+
<td width="250">[[Revision: Benderlink for BLM 3]]</td>
 
<td width="200">
 
<td width="200">
 
*Full support for BLM VGP-based controls</td>
 
*Full support for BLM VGP-based controls</td>

Latest revision as of 22:06, 14 October 2015

Back to Benderlink for BLM

Contents

Gears view small.png Benderlink for BLM - Third Quarter - 2015

October 14, 2015 Revision: Benderlink for BLM 5.3
  • Fixed radius level issue that could stop corrections loops
  • Allowed corrections to ignore end length corrections
  • Enhanced Communications to work with new Windows version of LASERVISION
  • Fixed Ping port capability for newer Windows
  • Added timed message if port to measuring center cannot open
Benderlinkblm v5.3 screen.png

Gears view small.png Benderlink for BLM - Third Quarter - 2013

August 2, 2013 Revision: Benderlink for BLM 5.2
  • Builds Supravision file with partname during every Supravision file import conversion in the FILE MENU.
Blinkblm v5 screen.jpg
July 31, 2013 Revision: Benderlink for BLM 5.1
  • Builds Supravision file with partname during every conversion
Blinkblm v5 screen.jpg
July 20, 2013 Revision: Benderlink for BLM 5
  • Add reverse rotation switch
  • Adjusted conversion process
  • Added new style of hardware key
  • Adjusted user interface
Blinkblm v5 screen.jpg

Gears view small.png Benderlink for BLM - Third Quarter - 2009

September 11, 2009 Revision: Benderlink for BLM 4.03
  • No longer disable controls during communication
  • Removed shutdown bug.
Blinkblm v4.jpg

Gears view small.png Benderlink for BLM - Second Quarter - 2009

May 18, 2009 Revision: Benderlink for BLM 4.02
  • Allow Benderlink to disable audio messages
  • Repaired some minor shutdown issues
Blinkblm v4.jpg
April 13, 2009 Revision: Benderlink for BLM 4
  • New Interface which includes, new LEDs, new LOAD and MERGE buttons, new Date/Time stamps
  • New Adjust Data Window to adjust the YBC data before sending to the bender
  • Completely rewritten HELP and MANUAL to include 100 pages of detail
  • New Eaton Leonard communications engine
Blinkblm v4.jpg

Gears view small.png Benderlink for BLM - First Quarter - 2009

Februrary 19, 2009 Revision: Benderlink for BLM 3.5
  • New dialogs that suggest when BLM files should be saved
  • Added a pulldown menu
  • Removed all automatic BLM Data File Overwrites to let the user choose
Blinkblm v3.5.jpg
Februrary 3, 2009 Revision: Benderlink for BLM 3.4
  • Allow to always set internal part number to external filename
  • Removed recognition for push-bending (at BLM's request)
Blinkblm bender network setup.jpg

Gears view small.png Benderlink for BLM - Fourth Quarter - 2007

December 7, 2007 Revision: Benderlink for BLM 3.2
  • Allow User to choose units being sent to the Supravision measuring center
  • Increased accuracy of stored floating point data
Benderlink blm unitsend.jpg
December 6, 2007 Revision: Benderlink for BLM 3.1
  • Confirm overwrites of BLM data files
  • Save a backup of BLM data files
  • Change lowercase Supravision part numbers to uppercase
Benderlink blm confirmoverwrite.jpg
October, 2007 Revision: Benderlink for BLM 3
  • Full support for BLM VGP-based controls
Blm vgp3d.jpg

Other Pages

Back to Benderlink for BLM