Benderlink for Addison to Vector 5.0

From ATTWiki
Revision as of 17:31, 20 February 2009 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Blinkswlogo.jpg

Solidworkslogo.png

Contents


Check.jpg New - Now Handles Bends 180 Degrees or Greater

Benderlink now automatically detects bends that have an angle of 180 degrees or more then performs a bisection into two smaller bend angles. This overcomes the problem of an intersection point at an unsolvable intersection by creating two intersection points with two bends where there was one.

Blinksw v2 sw180 2.jpg

Blinksw v2 sw180 3.jpg


This image shows the result of a bend being split into two adjacent bends. This part was drawn with a single large-angle bend in SolidWorks, then imported into Benderlink, and displayed in TubeCalc:

Blinksw v2 sw180 splitdemo.jpg


Check.jpg New - Combination of Adjacent Bends When Saving Bender Data

Since Benderlink can now handle bend angles of 180 degree bends or greater, it is now also able to recombine adjacent bends from the centerline into single bends when exporting to bender files.

This is a sample data chart before combination:

Blinksw combinedbends1.jpg

This is the same data chart after combination:

Blinksw combinedbends2.jpg

When saving data to a Supravision file, Benderlink will display this dialog if it finds any bends that can be combined:

Blinksw combinedbends3.jpg

If you choose to combine, then a report will be displayed after the combination is complete:

Blinksw combinedbends4.jpg



Check.jpg Change - TAURING Data Now Includes Straight Distances

Benderlink for SolidWorks now includes the straights in the TAURING bender data.

Blinksw v2 TauringData.jpg




Other Pages