VTube-LASER v1.55

From ATTWiki
Revision as of 04:11, 4 January 2011 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.55

Back to VTube-LASER

Vtube-laser screen 1 54.jpg


Check.jpg NEW: Radius Segment Scan Method

Since radius sections are often highly distorted with ovality and changing radius values along the bend, this new radius scan-segment measurement method allows for more accurate averaging of radius measurement for reverse-engineering of radius values by allowing users to scan as many as 10 arc segments if necessary for better averaging of radius values.

The Set Segment Scan Count box (see below) allows you to enter from 3 to 10 segments to measure per arc.

Vtube-laser radius segment measurement graphic.jpg

Vtube-laser radius segment scan count.jpg

Check.jpg ENHANCED - Measure Process Menu

The enhanced Measure Process menu is reorganized. The menu includes the new Straight Count box - which was moved from the Measure Setup menu.

The menu also includes a new field for the new Radius Segment Scan - segment count.

Vtube-laser measureprocess v1 55.jpg



Check.jpg ENHANCED - Measure Setup Menu

The Measure Setup program is condensed because the Straight Count setting has been moved to the Measure Process menu for consistency.

Vtube-laser measuresetup v1 55.jpg








Check.jpg NEW - PDF Printer Driver Setup Included in Installation

Now every VTube-LASER installation can also install a PDF printer driver for easy output of inspection reports in the PDF format. This lets operators create historical fixed reports with static date/time for a record of qualification of the tube shape.

The two programs installed are the CutePDF Writer printer driver and the GPL Ghostscript program - which is required by the CutePDF Writer print driver to operate.

Gpl ghostscript installation.jpg
Cute pdf installation.jpg

Other Pages