VTube-LASER v1.55
Revision 1.55Back to VTube-LASER |
NEW: Radius Segment Scan Method
Since radius sections are often highly distorted with ovality and changing radius values along the bend, this new radius scan-segment measurement method allows for more accurate averaging of radius measurement for reverse-engineering of radius values by allowing users to scan as many as 10 arc segments if necessary for better averaging of radius values.
|
ENHANCED - Measure Process Menu
The enhanced Measure Process menu is reorganized. The menu includes the new Straight Count box - which was moved from the Measure Setup menu. |
ENHANCED - Measure Setup Menu
The Measure Setup program is condensed because the Straight Count setting has been moved to the Measure Process menu for consistency. |
NEW - Realtime Calculation of Intersection Error
Each point is checked for a Maximum Intersection Error which is set in the Measuring 2 tab of the System Options menu. The default tolerance is 2mm, or 0.078 inches.
|
NEW - Code Signing of VTube.exe
The VTube program is now code signed in order to comply with the Microsoft Authenticode requirements.
|
NEW - Verified Bluetooth Compatible
VTube-LASER is verified to work with the FARO ScanArm Bluetooth connection. This allows connection to the FARO arms within 30 feet of the VTube-LASER computer without cables. |
ENHANCED - VTube-LASER Setup Files Include the FARO USB Setups
The VTube-LASER installation setup now includes the FARO USB drivers for either 32 or 64 bit computers. |
NEW - PDF Printer Driver Setup Included in Installation
Now every VTube-LASER installation can also install a PDF printer driver for easy output of inspection reports in the PDF format. This lets operators create historical fixed reports with static date/time for a record of qualification of the tube shape.
|
Other Pages
- Back to VTube-LASER