VTube-LASER Videos
See a complete list of VTube-LASER videos on this page.
|
Video Subpages Related to Specific Arms
Click on the images to enter the video subpages with videos for specific arms.
Latest Videos
Version 2.9.19
Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe
This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm. |
Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half
This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half. |
Video 102: VTube-LASER is Now Compatible with Baces USB Arms
This video shows VTube-LASER working with a Baces USB arm. |
Version 2.9.18
Video 101: How Automatic Laser Separation for UniScan Makes Scanning Tubes Easier (HEXAGON Arm)
This video shows the Automatic Laser Separation feature introduced in version 2.9.18 on March 15, 2018. |
Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend
This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend. |
|
Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm
This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS. |
Video 98: About the Small Diameter Warning
This video shows how Small Diameter Warning works along with its setup. |
Video 96: VTube-STEP and VTube-LASER New Radius Features
See the new radius features in this video. In Part Setup:
|
Version 2.9.17
Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer
Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.
Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).
Video 93: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the FARO QUANTUM SCANARM
Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).
Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17
This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).
Video 91: How To Reverse-Engineer to STEP file with a FARO ScanArm Using VTube-LASER
This video shows how to reverse-engineer a tube to STEP file. Michael Cone is using VTube-LASER 2.9.17 and a FARO Quantum S ScanArm.
Version 2.9.16
Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER
This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.
Version 2.9.14
Video 89: MEASURING SMALL TUBES with MICROSCRIBE
This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER. |
Version 2.9.12
Video 88: VTube-LASER and VTube-STEP Unlimited NOTE LIST Feature
This video shows the new unlimited NOTE LIST feature that allows you to add any number of notes to a VTube project.
Version 2.9.11
Video 87: VTube-LASER's IMPROVED SQUARE TUBE SCANNING (FARO)
This video shows the improved square-tube scanning feature in version 2.9.11 using a FARO ScanArm.
Version 2.9.10
Video 86: VTube-LASER's LASER SCAN FILTER SOUND
This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.
Video 85: Using VTube-LASER to Supply SOLIDWORKS with Data for Parametric Overlay
This video shows a workflow that allows you to reverse-engineer a Y-pipe sample into SOLIDWORKS. The workflow uses a parametrically-controlled template file in SOLIDWORKS that was created to overlay the scanned-in data for an approximate match. This is an advanced topic for SOLIDWORKS users that concentrates mainly on how it is possible to handle parametric control inside SOLIDWORKS with the help of VTube-LASER scanning.
|
Video 84: Measuring Convoluted Tube and Wire with VTube-LASER
This video shows VTube-LASER's ability to measure extremely convoluted parts. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.
Version 2.9.9
Video 83: How to Use VTube-STEP and VTube-LASER to Setup and Correct a UNISON Bender
This video shows how to use VTube to setup and correct a Unison bender from model through finished part.
Version 2.9.8
Video 82: Using MTA x 3 To Measure Highly Deformed Exhaust Pipes
This video shows using a three-measure MTA (Measured Tube Average) feature to reduce the deviations due to deformation by 50% in a highly deformed exhaust pipe.
Video 81: SOCO Bender Correction
This video was taken at the TFS open house in Elkhart, Indiana in May, 2018. It shows an actual bender correction and its result after one correction.
Video 80: TRAX Rail Arm Extender
This video shows a quick intro to the TRAX Rail system that extend the reach of a measuring center either 1800mm or 3500mm depending on the model.
Version 2.9.7
Video 79: EXPORT REPORTS to EXTERNAL NETWORK LOCATIONS
This video demonstrates how to export a report to an external network location.
This allows anyone with access to the network path to view VTube-LASER reports in a web browser.
|
Version 2.9.4
Video 78: VTube-LASER Corrects an SMT Bender
This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.
Version 2.9.3
Video 77: Build Entire Assemblies to SOLIDWORKS
This video demonstrates how this version of VTube-LASER can build entire assemblies to SOLIDWORKS for you in less than a minute with the press of a couple of buttons.
Video 76: Use the Measured Tube Averaging (MTA) Feature for Super Accurate Measurements
This video demonstrates how the MTA feature can measure both sides of the same tube to create a measured tube average for more reliable tube shape calculation.
Arm used in this video: ROMER Absolute Arm 7325SI |
||
Arm used in this video: FARO Quantum S ScanArm |
Other Pages
- See Retired VTube-LASER Videos
- Back to VTube-LASER