VTube-LASER Videos

From ATTWiki
Revision as of 01:40, 2 July 2016 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png See a complete list of VTube-LASER videos on this page.

Vtube-laser-1.84-fabtech2013.png



Version 2

Video 58: Speed Test - Reverse Engineer to SOLIDWORKS in Less than 60 Seconds

This video shows how fast VTube-LASER can reverse engineer a tube and build it in SOLIDWORKS - including BEND PROFILE measurements to measure the radius values. The version of VTube-LASER in this video is 2.5.

Vtube-laser v2.5 speedtest reverse to solidworks video.png



Video 57: How To COMPLETELY Reverse Engineer a Tube with the New BEND PROFILE Feature

This video shows how to measure a bend profile to calculate the true radius during reverse engineering of a tube. The version of VTube-LASER in this video is 2.5.

VTube-LASER BendProfile Reverse Radius video.png



Video 56: How to Manually Setup for Measuring Split Bends from Traditional Part Data (180-Degree Bends)

This video shows how to setup Split Bend for measuring 180-degree bends from parts defined in prints. The version of VTube-LASER in this video is 2.5.

VTube-LASER SplitBendSetup FromPartData video.png



Video 55: How to Use Bender Data to Setup the Master Part

Sometimes it's necessary to setup the master part from bender data rather than the normal solid model import or the manual entry of centerline XYZ coordinates.

This video shows you how to do that. The version of VTube-LASER in this video is 2.5.

VTube-LASER ReverseCalc video.png



Video 54: How to Calibrate the FARO Probes in VTube-LASER

Calibrated FARO probes is a foundational skill that is critical for successful measurements.

This video shows how to calibrate the probes and laser scanners from inside VTube-LASER.

The version of VTube-LASER shown in the video is 2.3.

Vtube calibratingprobes video.png



Video 53: Introductory Training in VTube-LASER Version 2

This video is designed for FARO account managers - but it's also good for customers with new users that need to learn how to use VTube-LASER.

It shows how to use the training/demo document for VTube-LASER for training and for giving demonstrations.

You can download the training document from this page.

The version of VTube-LASER shown in the video is 2.3.

Vtube trainingdocument video.png



Video 51: Changing the Part Shape by Changing Bender Data

See how easy it is to quickly change the part shape by editing the bender data.

The version of VTube-LASER shown in the video is 2.2.

Vtube reversecalc video.png



Video 50: VTube User Interface Scan Sounds

This video shows VTube-LASER User Interface scan sounds.

Sounds are an important part of the user interface in VTube. They are designed to give the operators auditory feed back so that they can keep their eyes focused on the part.

The version of VTube-LASER shown in the video is 2.2.

Vtube-laser-v2.2 video scansounds.png

Video 49: Measuring a Tube Gauge

This video shows how to measure a tube gauge with VTube-LASER.

Vtube-laser v2.2 measure tube gauges video.png

Video 48: Reverse-Engineering Demonstrated

This video shows how to reverse engineer a tube shape with VTube-LASER.

Vtube-step-2.2 reverse-engineer video.png

Video 47: MultiScan Measuring Technique

This video shows the MultiScan measuring technique.

Vtube-laser v2.2 multiscan video.png

Video 46: How to Measure Straights With Brackets And Other Objects

This video shows how to scan around objects on a tube straight.

Vtubelaser v2.2 scanaroundobjects.png

Video 45: How to Measure Previous Straights Again

This video shows how repeat a measurement of previous straights.

It also shows you how to skip ahead for over straights that have already been measured.

Vtube-laser v2.2 video previous straights measures.png

Video 44: Entering LRA Data to Establish the Master Data

This quick video shows how to enter LRA bender data to establish the MASTER data for a part.

We refer to the calculation required as "Reverse Calculation" because it reverses the normal direction of calculation in VTube so that the centerline XYZ data after the LRA data is entered.

Vtube-laser v2.2 video enterLRAData.png

Video 43: Wire-form Measuring - 20-second Import and 16-second Measure

For applications that are time-critical, this video shows how VTube-LASER can import and measure tubes very quickly.

Click on the image to watch a video with timers. The part in this video is a wire-form.

Vtube-laser v2.2 video multiscan speedtest.png

Video 42: How To Use a Solid Model to Build VTube-LASER MASTER Data

Click on the image to see a video on how to build VTube-LASER MASTER data from a solid model

Vtube-laser v2.2 video usemodel for master.png

Video 41: Winton Bender Corrections Loop Video

Click on the image to see a 60 second video on how correction loops work with the Winton RD bender:

Vtube-laser 2.2 winton correction loop video.png

Video 40: Sixty Second SPLIT BEND Feature Demo

It's easy and it's accurate: VTube-LASER measures 180 degree bends using a very accurate and unique SPLIT BEND feature.

This video shows how easy it is to use the feature with the FARO scanner.

Vtube-laser-2.2 splitbend video.png

Video 39: Measuring the Demo Tube 3 Radius With the Ball Probe

Measuring the radius with a ball probe is very consistent if done properly.

This video shows how to measure the radius with a ball probe to determine a good default radius during reverse engineering.

Vtube-laser-2.1 radius measure ballprobe video.png

Video 38: Measuring Demo Part 3 with the HD Scanner on a Table Surface

This is a quick video showing how to measure demo tube 3 on a table surface with the HD scanner.

There is no narration in this video.

Vtube-laser-2.1 demo tube 3 HDscan cutplane video.png

Video 37: Measuring Demo Part 3 with the HD Scanner in a Tube Clamp

This is a quick video showing how to measure demo tube 3 in a tube clamp with the HD scanner.

There is no narration in this video.

Vtube-laser-2.1 demo tube 3 HDscan video.png

Video 36: From Tube Measure to SolidWorks Speed Test

This is a demonstration of how to create a fully defined 3DSketch tube shape in SolidWorks by from a tube measurement in 2 minutes, 20 seconds.

Vtl-2-reverse speedtest SolidWorks video.png

Version 1.96

Video 35: The Difference Between End Length Adjustment and End Measured Offsets

This is a tutorial by the developer of VTube-LASER, Michael Cone. Michael explains the difference between the END LENGTH ADJUSTMENT values and the END MEASURED OFFSET values in the Part Setup menus.

Vtl-1.96-endlengthadjust endmeasuredoffset video.png

Video 34: Using Tube Data Storage Menu to Access Historical Data

This is a tutorial by the developer of VTube-LASER, Michael Cone. Michael will show you how use Tube Data Storage to permanently store historical data about every measure made by VTube-LASER.

Vtl-1.96-tubedatastorage video.png

Version 1.94

Video 33: Reverse Engineering a Tube Using the Ball Probe

This is a tutorial by the developer of VTube-LASER, Michael Cone. Michael will show you how you can reverse engineer a tube with a FARO Edge arm and the ball probe.

Vtube-laser-1.94-reverse engineer tactile video.png.png

Video 32: The Benefits if Wide Diameter Scanning

This is a tutorial by the developer of VTube-LASER, Michael Cone. Michael will show you why wide diameter scanning is superior to other forms of scanning tubes.

Vtube-1.94 widediameterscanning video.png

Video 31: How to Reverse-Engineer a Tube

This video shows how to reverse engineer a tube in VTube-LASER 1.94.

The tube used is demo tube number 3. (Filename: "VTube-Laser Demo 3.vtp")

Vtube-1.94 reverse engineering video.png

Video 30: Springback Compensation Tutorial

This video shows how calculate the anticipated bend angle springback and then compensate the bend setup to make the first part shape close to the nominal shape.

Vtube-1.94 springback compensation video.png



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_Videos&oldid=30487"