RDS Versions for ROMER Scanners
Information about RDS (Romer Data Service) Versions and HEXAGON scanner versions
|
Contents |
- See also HEXAGON Absolute Arm Feature Packs or Control Packs
- See also VTube-LASER ROMER RDS Performance Recommendations
HEXAGON Scanner RDS (Romer Data Service) Driver Versions Supported
“RS” refers to “ROMER Scanner” The RDS versions are listed from newest to oldest.
NOTE: The RS1 scanner requires RDS 4.0 or 4.1 – but not newer. |
HEXAGON Scanners Website
HEXAGON Scanner Support
According to HEXAGON, VTube-LASER can support any scanner supported by RDS directly, including...
This scanner is for the RA8 7-axis arms only. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe. |
|
This is for RA8 7-axis Portable Arms. It is best for parts that have consistent surface reflectivity properties along the entire part because the camera chooses a single exposure for each stripe. |
|
|
|
|
|
|
ROMER Ball Probe Support
All ball probe systems on devices that run through RDS are compatible with VTube-LASER. |
Other Pages