Difference between revisions of "Machine Lube Duration"
From ATTWiki
m |
|||
| Line 11: | Line 11: | ||
The value of 5000 in this example represents 5000 milliseconds (5 seconds) of the machine lube output enabled during [[auto lube]]. | The value of 5000 in this example represents 5000 milliseconds (5 seconds) of the machine lube output enabled during [[auto lube]]. | ||
| + | |||
| + | |||
| + | ==Other Pages== | ||
| + | *Back to [[CNC Bender Technical Notes]] | ||
| + | *See [[Auto Lube]] for details on how to test the Auto Lube system | ||
| + | *See [[Configuring Machine Lube Settings]] | ||
| + | *See [[CNCProcessor.cfg]] | ||
Latest revision as of 21:13, 28 January 2009
What is It?
This is a property in the CNCProcessor.cfg file. It is a millisecond duration value that instructs CNC Processor to enable the machine lube event when the bend count reaches a preset value for a programmed number of milliseconds.
Value
A valid value is set from 1 to any integer value greater than 1 like this:
Machine Lube Duration= 5000
The value of 5000 in this example represents 5000 milliseconds (5 seconds) of the machine lube output enabled during auto lube.
Other Pages
- Back to CNC Bender Technical Notes
- See Auto Lube for details on how to test the Auto Lube system
- See Configuring Machine Lube Settings
- See CNCProcessor.cfg
