Difference between revisions of "VTube-LASER Tube Clamp"

From ATTWiki
Jump to: navigation, search
(Created page with "<table cellpadding=10 width=900> <tr valign=top> <td width=300 > The VTube-LASER tube clamp holds tube shapes for measuring.<br><br> The tube clamp uses a quick clamping syste...")

Revision as of 13:57, 24 October 2014

The VTube-LASER tube clamp holds tube shapes for measuring.

The tube clamp uses a quick clamping system for instant tube grip and positioning.

* Back to VTube-LASER

Tubeclamp-logo.png

== Features ==
* It has a heavy and stable base. The total weight is 17.5 lbs (8 kg).

* The pillar is easy to grip.

* The ball and socket joint allow for flexible positioning.

* It includes a plastic covered T-handle for better feel during tightening or loosening.

* The clamp handle can spin close and open with a few hits.

* The base and pillar finish is industrial-grade glossy black finish.

* The bottom uses non-slip cork for good surface grip.



Tubeclamp empty vertical.png Tubeclamp down.png
==Clamp Sizes==
Various clamp sizes can be made to order.

* The clamp systems can be designed to hold tube and pipe from 1/8 inch(3mm) up to 6 inch (150mm). The clamps shown on this page are for up to 2.5 inch (63.5 millimeter) diameter parts.)

* The overall height is 12 inches (305 millimeters).

Tubeclamp height.png

Tubeclamp jawwidth 3inches.png

Tube clamp sizes available:

* 1.0 inches (25 millimeters) * 2.5 inches (63 millimeters) * 4.5 inches (114 millimeters) * 6.0 inches (152 millimeters)
==Other Images== Tubeclamp jaws closeup.png ==Other Pages== * Back to VTube-LASER * Purchase a tube clamp at our online store.