Revision as of 13:57, 24 October 2014
The VTube-LASER tube clamp holds tube shapes for measuring.
The tube clamp uses a quick clamping system for instant tube grip and positioning.
* Back to VTube-LASER |
|
== Features ==
* It has a heavy and stable base. The total weight is 17.5 lbs (8 kg).
* The pillar is easy to grip.
* The ball and socket joint allow for flexible positioning.
* It includes a plastic covered T-handle for better feel during tightening or loosening.
* The clamp handle can spin close and open with a few hits.
* The base and pillar finish is industrial-grade glossy black finish.
* The bottom uses non-slip cork for good surface grip.
| | |
==Clamp Sizes==
Various clamp sizes can be made to order.
* The clamp systems can be designed to hold tube and pipe from 1/8 inch(3mm) up to 6 inch (150mm). The clamps shown on this page are for up to 2.5 inch (63.5 millimeter) diameter parts.)
* The overall height is 12 inches (305 millimeters).
|
Tube clamp sizes available:
* 1.0 inches (25 millimeters) * 2.5 inches (63 millimeters) * 4.5 inches (114 millimeters) * 6.0 inches (152 millimeters) |
|
==Other Images==
==Other Pages== * Back to
VTube-LASER *
Purchase a tube clamp at our online store.