Difference between revisions of "Principles of CNC Bender Data Transfer"

From ATTWiki
Jump to: navigation, search
(Use Supravision Data to Transfer the Master Data)
(Use Supravision Data to Transfer the Master Data)
Line 16: Line 16:
 
</td>
 
</td>
 
<td>
 
<td>
 +
[[Image:Vtube-step maincreen.jpg|300px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 15:37, 18 June 2010

Cncbender logo.jpg

This describes basic principles for bender data transfer to CNC Bender.

Use Supravision Data to Transfer the Master Data

CNC Bender can import Supravision data files that contain the XYZ master data for setup of a new part.

STEP 1

Create the SV data file using a software package like Supravision, TubeCalc, TubeCAD, VTube-STEP or one of the Benderlink packages. If you use measuring center software like Supravision or DOCS.

Vtube-step maincreen.jpg

STEP 2

Save the file to the c:\cnc\svparts folder in CNC Bender operator station (use a thumb drive or make a direct network connection)

STEP 3

In CNC Bender, go to the Tube Shape menu/XYZ tab

Cncbender xyzpage 180pipe.jpg

STEP 4

Press the SVin button button to select the Supravision file. Import the data into the XYZ page.

CNCBenderCalcSVin.jpg

STEP 5

Press the Calc FRB button to build the bender data

CNCBenderCalcFRB.jpg

STEP 5

CNC Bender automatically switches to the FRB menu to display the calculated data

CNCBenderFRBpage.jpg