Difference between revisions of "VTube-LASER v1.94"
From ATTWiki
(Created page with "<table> <tr cellpadding=10> <td width=225> 300px ==Revision 1.93== * Back to VTube-STEP * Back to VTube-STEP Revisions * Back to VTube...") |
(→Revision 1.93) |
||
| Line 3: | Line 3: | ||
<td width=225> | <td width=225> | ||
[[image:vtube-laser_logo.jpg|300px]] | [[image:vtube-laser_logo.jpg|300px]] | ||
| − | ==Revision 1. | + | ==Revision 1.94== |
* Back to [[VTube-STEP]] | * Back to [[VTube-STEP]] | ||
* Back to [[VTube-STEP Revisions]] | * Back to [[VTube-STEP Revisions]] | ||
Revision as of 03:38, 6 August 2014
|
Revision 1.94
|
|
- See VTube-LASER Customer Support Page to download the latest version.
NEW: Import CSM M3 Bender Files (VTube-STEP Mode)
|
(The VTube-STEP mode is included with VTube-LASER.) VTube-STEP can now import CSM M3 bender files.
|
|
NEW: Added the Default Tolerance Value in Part Setup
|
Some output formats prefer to have a default tolerance built into the export, so now the Default Tolerance value is included in the VTube-LASER Part Setup menu. |
|
NEW: Added to the Popup Menu to Synchronize End Diameters with Main Diameter
|
The pop up menus for the Part Setup menu (STEP and LASER modes) now allow for the end diameters to be synchronized with the main diameter. |
|
NEW: Previous Paths List in Quick Open
|
The Quick Open dialog now has a pull-down list that shows all the recent previous paths used to load VTube project files or imported solid model files. |
 |
Other Changes
|
Other
- Back to VTube-STEP
- Back to VTube Software Updates (for LASER Mode)
- Back to VTube-LASER
- See VTube Language Editor
