Difference between revisions of "End-Scan Using the End Wall"

From ATTWiki
Jump to: navigation, search
(→‎How To Use This End-Scan Technique)
(→‎How To Use This End-Scan Technique)
Line 36: Line 36:
 
<td width=300>
 
<td width=300>
 
* Align the scanner at the end wall of the tube.<br><br>
 
* Align the scanner at the end wall of the tube.<br><br>
 +
*Press the green button until VTube-LASER is finished scanning all the end stripes.<br><br>
 +
</td>
 +
<td width=300>
 +
[[image:EndWithEndWall1.jpg|300px]]
 +
</td>
 +
</tr>
 +
</table>
 +
 +
 +
===Another Way to Use This End-Scan Technique===
 +
 +
<table cellpadding=10>
 +
<tr valign=top>
 +
<td width=300>
 +
* Align the scanner so that it touches one end wall of the tube.<br><br>
 
*Press the green button until VTube-LASER is finished scanning all the end stripes.<br><br>
 
*Press the green button until VTube-LASER is finished scanning all the end stripes.<br><br>
 
</td>
 
</td>

Revision as of 22:55, 27 January 2012

Vtube-laser logo.jpg How to perform the end-wall end scan.

Vtube-laser 1 73.jpg


Why the End-Scan technique is important

This end-scan method is useful for increase in precision over the scissor method.

We recommend this for increased precision where high-reflectivity and burrs are not an issue on the end wall of the tube.

We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.

How To Use This End-Scan Technique

  • Align the scanner at the end wall of the tube.

  • Press the green button until VTube-LASER is finished scanning all the end stripes.

EndWithEndWall1.jpg


Another Way to Use This End-Scan Technique

  • Align the scanner so that it touches one end wall of the tube.

  • Press the green button until VTube-LASER is finished scanning all the end stripes.

EndWithEndWall1.jpg

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=End-Scan_Using_the_End_Wall&oldid=17490"