Difference between revisions of "VTube-STEP v1.59"

Revision as of 21:12, 9 February 2011

The rotation values are now recorded properly in the Supravision output files and the Supravision data sent through the bender interface menu.

VTube now no longer tries to forms straights with a practical length of zero. They are omitted from the solid model created.

@@ Line 16: / Line 16: @@
-===[[image:Check.jpg|25px]] ENHANCED - Added Automatic Support for 180 Degree Bends===
+===[[image:Check.jpg|25px]] FIX- Supravision Output Fix to the Rotations===
 <table>
@@ Line 22: / Line 22: @@
 <tr>
 <td width=300>
-There is no single intersection point for 180 degree bends - so they require special handling by automatically splitting the bend into two sequential bends.<br><br>
+The rotation values are now recorded properly in the Supravision output files and the Supravision data sent through the bender interface menu.</td>
-The image on the right shows two parallel straights that form a 180 degree bend.  The built-in logic handles the creation of the two intersection points and splitting of the bend into two 90 degree bends with a zero straight.
-</td>
 <td>
-[[image:vtube180degbend.jpg|300px]]
 </td>
 </tr>