Difference between revisions of "Jog Motion"

From ATTWiki
Jump to: navigation, search
Line 1: Line 1:
 
<table>
 
<table>
−
<tr align=top>
+
<tr valign=top>
−
<td width=300>
+
−
[[image:cncv12procontrol_withteachmode.jpg|300px]]
+
−
</td>
+
 
<td>
 
<td>
 
[[image:v12teachmode_buildcustomcommand.jpg|500px]]
 
[[image:v12teachmode_buildcustomcommand.jpg|500px]]
 +
</td>
 +
<td width=300>
 +
[[image:cncv12procontrol_withteachmode.jpg|300px]]
 
</td>
 
</td>
 
</tr>
 
</tr>

Revision as of 16:18, 21 January 2010

V12teachmode buildcustomcommand.jpg

Cncv12procontrol withteachmode.jpg

  • A Jog Motion is a motion for a single axis or actuator that is stored in a Custom Command for use by Teach Mode if you choose to teach the bender. (See Screen 1)

  • Custom Commands begin without any Jog Motions (See Screen 2) Add a Jog Motion using the Add a jog motion button

  • Now the Jog Motion exists, but it is unassigned or empty. Click on the Jog Motion name cell to select a Jog Motion. (See Screen 3)

  • Jog Motions are selected from the Jog Motion Selection menu by touching the Jog Motion name cell in a Custom Command menu (See Screen 4)

  • Jog Motion values can be entered using a keyboard, or entered using Teach Mode

  • Multiple Jog Motions can be stored in a single Custom Command. When they are combined in a single Custom Command, then CNC Processor runs them all at the same time.

Screen 4: Select a Jog Motion from the Selection menu
Screen 1: Three Jog Motions in a Custom Command - All three run at the same time.
Screen 2: An empty Custom Command (no Jog Motions present)
Screen 3: Click on an unassigned (empty) Jog Motion cell to select a Jog Motion




Jog Motion System Configuration

  • The existence of a Jog Motion in the CNC Bender user interface is completely configurable.

  • You can add or edit your own Jog Motion or remove the existing Jog Motions from the user interface using a single configuration file.

  • You can even rename the Jog Motion name (or translate the motion to another language).




Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Jog_Motion&oldid=13425"