Difference between revisions of "Push Bending Profile Table"

From ATTWiki
Jump to: navigation, search
Line 1: Line 1:
 
This is a sample Push Bend Profile Table.
 
This is a sample Push Bend Profile Table.
  
[[image:Cncbender_v11_pushbend_profilesetup.jpg|600px]]
+
[[image:Cncbender_v11_pushbend_profilesetup.jpg|500px]]
 
<br><br>
 
<br><br>
 
Each profile row contains a profile setup for a given radius.  An unlimited number of profile values can be entered.   
 
Each profile row contains a profile setup for a given radius.  An unlimited number of profile values can be entered.   

Revision as of 16:42, 25 April 2008

This is a sample Push Bend Profile Table.

Cncbender v11 pushbend profilesetup.jpg

Each profile row contains a profile setup for a given radius. An unlimited number of profile values can be entered.

Value Name Description
Profile Name The name is how the profile is displayed and selected in the Bend Options.
Arm Angle This is the final angle of the arm during push-bending.
Arm vAdjust This allows the velocity of the bend arm to be adjusted by a percentage of the original calculated velocity.
Arm vAdjust This allows the velocity of the bend arm to be adjusted by a percentage of the original calculated velocity.
Feed Position This is how far the carriage must travel to achieve the "@ Degrees" value.
Feed Velocity This is the velocity of the carriage during the bend. The velocity of the carriage is used to calculate a starting bend arm motion speed.
@ Degrees This is the angle of the tube that is achieved by the "Feed Position" value above.





Using this method of calculation, it is possible to calculate different Push Bends by indicating the bend angle.