Difference between revisions of "VTube-LASER Videos"

Revision as of 21:33, 25 February 2012

See a complete list of VTube-LASER videos on this page.

v1.75.4 Measuring a highly deformed 6 inch tube for hydroforming
v1.75.4 Reverse engineering a highly reflective part with a 180 degree bend
v1.75.4 How to compare two Supravision project files in VTube-LASER
v1.75.4 STEP Mode Solid Model Import of Large Diameter Tube

Dynaflux DF315-16 Crack Check D-F Developer

Works well
DF315-16 Flammable Nuclear grade uses non-chlorinated solvent
DNF315-16 Non-flammable Standard grade
Very inexpensive ($5 per can)
For applications that require cleaning, the corresponding cleaner uses the same Dynaflux part number.

@@ Line 18: / Line 18: @@
 ===Version 1.75===
-[[image:Magnaflux_Logo.jpg|200px]]
+<table cellpadding="5" width="700">
-<table cellpadding=10>
+<tr>
-<tr valign=top>
+<td width="400">
-<td width=500>
+v1.75.4  [http://youtu.be/yGJhk3R26u0 Measuring a highly deformed 6 inch tube for hydroforming]
-Magnaflux Spotcheck SKD-S2 Developer<br><br>
-* Works well
-* Very expensive compared to Dynaflux ($50 to $75 per can)
-* For applications that require cleaning, the corresponding cleaner is SKC-S
 </td>
-<td width=300>
+<td>
-[[image:Magnaflux_Developer.jpg|125px]]
-[[image:Magnaflux_Cleaner.jpg|125px]]
 </td>
 </tr>
+<tr>
+<td width="400">
+v1.75.4  [http://youtu.be/kvo8-7N99nw Reverse engineering a highly reflective part with a 180 degree bend]
+</td>
+<td>
+</td>
+</tr>
+<tr>
+<td width="400">
+v1.75.4  [http://youtu.be/kGyl7Z5bgqA How to compare two Supravision project files in VTube-LASER]
+</td>
+<td>
+</td>
+</tr>
+<tr>
+<td width="400">
+v1.75.4  [http://youtu.be/7wD6g7ueYtY STEP Mode Solid Model Import of Large Diameter Tube]
+</td>
+<td>
+</td>
+</tr>
 </table>