Difference between revisions of "Principles of CNC Bender Data Transfer"

From ATTWiki
Jump to: navigation, search
(Use Supravision Data to Transfer the Master Data)
(Use Supravision Data to Transfer the Master Data)
Line 9: Line 9:
 
# Save the file to the '''c:\cnc\svparts''' folder in CNC Bender operator station (use a thumb drive or make a direct network connection)
 
# Save the file to the '''c:\cnc\svparts''' folder in CNC Bender operator station (use a thumb drive or make a direct network connection)
 
# In [[CNC Bender]], go to the Tube Shape menu/XYZ tab and press the SVin button.
 
# In [[CNC Bender]], go to the Tube Shape menu/XYZ tab and press the SVin button.
[[Image:Cncbender xyzpage 180pipe.jpg]]
+
 
 +
[[Image:Cncbender xyzpage 180pipe.jpg|400px]]
 +
 
 
# Import the centerline data into the XYZ page.
 
# Import the centerline data into the XYZ page.
 
# Press the Calc FRB button to build the bender data in the FRB tab menu
 
# Press the Calc FRB button to build the bender data in the FRB tab menu

Revision as of 15:01, 18 June 2010

Cncbender logo.jpg

This describes basic principles for bender data transfer to CNC Bender.

Use Supravision Data to Transfer the Master Data

CNC Bender can import Supravision data files that contain the XYZ master data for setup of a new part.

  1. Create the SV data file using a software package like Supravision, TubeCalc, TubeCAD, VTube-STEP or one of the Benderlink packages. If you use measuring center software like Supravision or DOCS.
  2. Save the file to the c:\cnc\svparts folder in CNC Bender operator station (use a thumb drive or make a direct network connection)
  3. In CNC Bender, go to the Tube Shape menu/XYZ tab and press the SVin button.

Cncbender xyzpage 180pipe.jpg

  1. Import the centerline data into the XYZ page.
  2. Press the Calc FRB button to build the bender data in the FRB tab menu