CNC Bender v10-20080219

CHANGES to CNC PROCESSOR

Added New Configurable Pulse Duration Value for Machine Lube

The pulse duration for the machine lube plunger was always as quick as possible.

This version of CNC Processor allows you to control the Machine Lube Pulse Duration. This value is indicated in milliseconds, and is configured in the CNCProcessor.cfg file like this. In the machine lube section, the keyname is added for Machine Lube Pulse Duration.

[Machine Lube]

Machine Lube Duration= 20000
Lube Machine At Bend Count= 500
Pulse Machine Lube Pump= 1
Watch For Machine Lube Complete Input= 0
Machine Lube Pulse Duration=5000

The default value is 2000, which would move the plunger forward every 2 seconds. (In this case, the plunger will alternate forward and back 1/2 of the entered value - or 1 second.)