Difference between revisions of "VTube-LASER Precision Weight Control Alignment"

From ATTWiki
Jump to: navigation, search
(Values)
(Values)
Line 65: Line 65:
 
The T1 and T2 TRANSLATE values control the influence that tangent 1 or tangent 2 have in each straight. This is a translation influence - which means it controls the influence along the X, Y, and Z axes without rotation.<br><br>
 
The T1 and T2 TRANSLATE values control the influence that tangent 1 or tangent 2 have in each straight. This is a translation influence - which means it controls the influence along the X, Y, and Z axes without rotation.<br><br>
  
The STRAIGHT VECTOR values allows the plane of each bend to have more or less influence. This is transformational influence - which means it controls the rotation (angular) orientation of the alignment.
+
The STRAIGHT VECTOR values allow each straight to have more or less influence with rotational or angular alignment. (This is referred to as transformation influence - which means the change is rotational or angular.)
 
<br><br>
 
<br><br>
 
Set these values to change the alignment. Then press recalculate alignment.
 
Set these values to change the alignment. Then press recalculate alignment.

Revision as of 15:26, 19 August 2019

Vtube-laser logo 1.96.png



Vtube-laser v2.7 screenshot.png

Contents


This feature was added in VTube-LASER v2.8.

PRECISION WEIGHT CONTROL Alignment

PRECISION WEIGHT CONTROL alignment allows you to completely turn off certain sections of the tube for alignment or give emphasis to any section just by setting weights from 0 to 1000.

A weight of "0" tells VTube to ignore the point completely in alignment. A weight of 1 means "give it 1 times the normal weight." A weight of 2 means "give it double weight."

This shows emphasis given to end A. Note that some of the alignment weights are ZERO - which means that those points are ignored in the alignment.

VTube-STEP v2.8 precisionweightcontrol alignment enda.png

This shows emphasis given to end B.

VTube-STEP v2.8 precisionweightcontrol alignment endb.png

This shows emphasis given to the middle straight.

VTube-STEP v2.8 precisionweightcontrol alignment middle.png



Values

The T1 and T2 TRANSLATE values control the influence that tangent 1 or tangent 2 have in each straight. This is a translation influence - which means it controls the influence along the X, Y, and Z axes without rotation.

The STRAIGHT VECTOR values allow each straight to have more or less influence with rotational or angular alignment. (This is referred to as transformation influence - which means the change is rotational or angular.)

Set these values to change the alignment. Then press recalculate alignment.

Precisionweightinggrid.png

Popup Menu

As of 2.9.17, VTube also includes a popup menu to make changing the values easier.

Precisionweightinggrid popup.png

Other Pages