TubeCAD Pro v8-20131112

From ATTWiki
Revision as of 02:21, 13 November 2013 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Tcadpro logo.jpg

Version 8-20131112

Back to TubeCAD Pro

Tcadpro demo generated.jpg




Check.jpg NEW - TubeCAD Builds Constrained Points and Centerlines in SolidWorks Tube Centerline 3DSketches

Tcadpro-solidworks-constrained-geo.png
Previous versions of TubeCAD did not constrain the points or centerlines when building SolidWorks tube shapes. This version does if the options are enabled in the new Build SolidWorks window.

Tcadpro-solidworks-constrained-geo-in-sw.png


Check.jpg NEW - TubeCAD Build to SolidWorks Includes End Offsets in Sweep

This version of TubeCAD can build a SolidWorks tube with end offsets included in the diameter.

Positive end offsets make the diameter longer relative to the end point. Negative offsets make the diameter shorter relative to the end point.

Tcadpro-endoffset.png

Tcadpro-solidworks endoffsets.png



Check.jpg OTHER

  • TubeCAD now remembers the DXF path programmed the options menu. This path is used to start the DXF export dialog in the proper location. It is also used to build temporary DXF files for automatic transfer to AutoCAD and Intellicad.

Tcadpro options dxfpath.png


Other Pages