Copy a default VTube configuration to another computer with VTube

Back to VTube-STEP
Back to VTube-LASER

Steps to copying a default setup

Copying from one computer to another requires that both computers are running the same version of VTube-LASER or VTube-STEP. It is ok to copy a configuration from VTube-LASER to a computer with VTube-STEP as long as the program versions are the same. Click in the top toolbar on the Information button to check the current version.

STEP 1 Use the toolbar button to clear VTube.
STEP 2 Change the values in VTube to whatever you want them be when you perform a project clear in the future. Be sure that no tube data exits in this state, or VTube will clear the data to preset values with a tube. (Of course, you can do this, if you really intend to do it.)
STEP 3 Press the System Options button.
STEP 4 Press the Project Setup tab, and then press the Set Project Default State button.
STEP 5 Exit the System Options menu. VTube will now clear to your new default settings when you clear VTube projects.