Calibration-Leapfrog-Move Targets

From ATTWiki
Revision as of 21:12, 24 October 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

This conical seat target is useful for calibrating ball probes.

In sets of three or more, they turn into leapfrog or tube move targets that help VTube-LASER operators measure parts longer than the FARO arm reach using the arm leapfrog or tube move.

Vtube-laser target logo.png

Features

  • The targets use a magnetic base to attach to any metalic surface or metal spring clamp.

  • They are good for standard 3 or 6 millimeter FARO probes.

  • The pillar finish is industrial-grade glossy white finish.



Threetargets closeup.png

Target Size

The target size is:

  • 1.50 inches (38 millimeters) diameter at the magnet base

  • 1 inch (25 millimeters) diameter at the pillar

  • 1.375" tall from the base bottom to the top of the conical surface.
  • 0.365" (9 millimeters) diameter conical hole entrance.
  • 0.20" (5 millimeters) deep conical hole.

Vtube-laser targets ballprobe.png

Vtube-laser target dimensions.png

Other Images

Tubeclamp jaws closeup.png Tubeclamps holdingtube2.png

Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=Calibration-Leapfrog-Move_Targets&oldid=25849"