Benderlink for Flexbending Systems

From ATTWiki
Revision as of 21:27, 17 June 2009 by Mcone (Talk | contribs)

Jump to: navigation, search

Benderlink flexbending logo.jpg


The Wayne Trail Flexbending Systems is one of the most complex bender systems available anywhere. It uses multiple sub-benders that performs bending from both ends of the tube at the same time. It is completely programmable for changing parts in seconds.

Benderlink for Flexbending Systems simplifies the setup and correction of the system through a series of sophisticated setup screens that convert standard bender data to the Flexbending System style data.

It allows you to enter XYZ centerline data, convert that data to standard bender data, then convert that data to Flexbending Systems data through sophisticated mapping screens that teach the bender how to assign the standard bender data to its sub-benders. After the initial mapping setup is complete, the software converts measuring center corrections automatically to steer the bender to a good part.

Benderlink flexbending screens.jpg

Major Features

  1. Login user control: Administrator, Supervisor, and Operator levels allow varying level of access and control
  2. Rotation reports that quickly show the downstream rotations - in order to prevent rotation axis overtravel