Difference between revisions of "Benderlink for Flexbending Systems"

From ATTWiki
Jump to: navigation, search
(Major Features)
Line 18: Line 18:
  
 
#Login user control: Administrator, Supervisor, and Operator levels allow varying level of access and control
 
#Login user control: Administrator, Supervisor, and Operator levels allow varying level of access and control
#Rotation reports that quickly show the downstream rotations - in order to prevent rotation axis overtravel
+
#Logs show who made changes to the data and when
 +
#Sophisticated rotation reports that quickly show how rotations are affected downstream from the current rotation - in order to prevent rotation axis overtravel

Revision as of 21:29, 17 June 2009

Benderlink flexbending logo.jpg


The Wayne Trail Flexbending Systems is one of the most complex bender systems available anywhere. It uses multiple sub-benders that performs bending from both ends of the tube at the same time. It is completely programmable for changing parts in seconds.

Benderlink for Flexbending Systems simplifies the setup and correction of the system through a series of sophisticated setup screens that convert standard bender data to the Flexbending System style data.

It allows you to enter XYZ centerline data, convert that data to standard bender data, then convert that data to Flexbending Systems data through sophisticated mapping screens that teach the bender how to assign the standard bender data to its sub-benders. After the initial mapping setup is complete, the software converts measuring center corrections automatically to steer the bender to a good part.

Benderlink flexbending screens.jpg

Major Features

  1. Login user control: Administrator, Supervisor, and Operator levels allow varying level of access and control
  2. Logs show who made changes to the data and when
  3. Sophisticated rotation reports that quickly show how rotations are affected downstream from the current rotation - in order to prevent rotation axis overtravel