Benderlink for Eaton Leonard

From ATTWiki
Revision as of 22:53, 7 July 2008 by Mcone (Talk | contribs)

Jump to: navigation, search

Blinkellogo.jpg

Win xp logo.jpg
Win vista logo.jpg
Wifi logo.jpg


This is a software/hardware system that allows any Windows 2000, XP, or Vista computer to communicate with Eaton Leonard benders that use the legacy EL current loop protocol (Velog, EL-2000, Premier).

Blinkel web splash.jpg







How It Works

Benderlink communicates with a device attached to your bender called the Benderlink Ethernet Module. This module is an industrial box that contains electronics that is designed to perform direct communications through specialized electronics with Eaton Leonard benders. Each Benderlink Ethernet Module comes with both CABLE and WIRELESS capabilities.



This is the ONLY WIRELESS (WiFi) technology available in the world for legacy Eaton Leonard controls.

This module uses our Communications Board for Eaton Leonard - CB-EL1 for connection to Eaton Leonard benders.


Benderlink ethernet module for el.jpg





EL Data - Offline Editing and Network Storage

Benderlink for EL allows operators to edit ALL the Eaton Leonard data transferred to Velog, EL-2000, and Premier controls. Hundreds of EL values have been identified and are now completely editable inside the Edit EL Data window.

Blinkel editscreen.jpg

An easy-to-use user interface has been designed to allow operators to easily change values for Eaton Leonard benders very quickly. Examine the user interface on the right, and you will see how simple the Eaton Leonard value structure has been made. The box on the left allows for easy access to all SETUP and EXTENDED SETUP values. The values have been grouped into logical groups for easier access.

The YBC grids on the right are separated the YBC data into four groups: Axis Data, Velocity Data, Function Data, and Stop and Last Data. Editing the data is very fast because moving to the correct variable is very fast.

Data can be sent to one of up to 100 benders, or saved on a local or network drive for backup.





AICON TubeInspect

Aicon system.jpg

The AICON TubeInspect measuring center is a vision system that is designed to measure tubing that uses Benderlink for Eaton Leonard for communication with the legacy EL benders.

Benderlink for EL is designed to read AICON MES (measuring center) files, and use them to correct EL benders.

PDF DataSheet

Blinkel datasheet page1.jpg

Download a DataSheet for Benderlink for EL [1]

REVISIONS

July 7, 2008 Revision: Benderlink for EL v4-20080707
June 19, 2007 Revision: Benderlink for EL v4-20070619
June 6, 2007 Revision: Benderlink for EL v4-20070606



OTHER PAGES