Benderlink for Eaton Leonard

From ATTWiki
Revision as of 18:02, 12 September 2012 by Mcone (Talk | contribs)

Jump to: navigation, search

Blinkellogo.jpg

Benderlink for Eaton Leonard

  • Bi-directional communication with Eaton Leonard benders using the standard current-loop protocol.
  • Edit, manipulate, and store all Eaton Leonard data in Windows or in your network.
  • Back to Benderlink for Eaton Leonard

Blinkel v4-20080909 mainscreen.jpg






How It Works

Benderlink understands the data structure and communications protocol of older legacy Eaton Leonard benders.

It can communicate with and edit all of the information on the Premier control.

El premier 001.jpg

It can communicate with and edit all the information on the EL-2000 control.

El2000.jpg

It can also communicate with and edit all of the information on the Velog control.

El velog 001.jpg

Benderlink Ethernet Module

Benderlink works with our Benderlink Ethernet Module to communicate through the Eaton Leonard current loop protocol. This module is an industrial box that contains electronics that is designed to perform direct communications through specialized electronics with Eaton Leonard benders. Each Benderlink Ethernet Module comes with either CABLE or CABLE and WIRELESS capability.

This is the ONLY WIRELESS (WiFi) technology available in the world for legacy Eaton Leonard controls.

This module uses our Communications Board for Eaton Leonard - CB-EL1 for connection to Eaton Leonard benders.

Blink ethernet module vector benderside 600.jpg







EL Data - Offline Editing and Network Storage

Benderlink for EL allows operators to edit ALL the Eaton Leonard data transferred to Velog, EL-2000, and Premier controls. Hundreds of EL values have been identified and are now completely editable inside the Edit EL Data window.



Blinkel editscreen.jpg

An easy-to-use user interface has been designed to allow operators to easily change values for Eaton Leonard benders very quickly. Examine the user interface on the right, and you will see how simple the Eaton Leonard value structure has been made. The box on the left allows for easy access to all SETUP and EXTENDED SETUP values. The values have been grouped into logical groups for easier access.

The YBC grids on the right are separated the YBC data into four groups: Axis Data, Velocity Data, Function Data, and Stop and Last Data. Editing the data is very fast because moving to the correct variable is very fast.

Data can be sent to one of up to 100 benders, or saved on a local or network drive for backup.





Demonstration Videos for Benderlink for Eaton Leonard

Download and view videos that show how Benderlink for SolidWorks works.

Sw2el movie.jpg






PDF DataSheet

Blinkel datasheet page1.jpg

Download a DataSheet for Benderlink for EL [1]

REVISIONS

September 9, 2008 Revision: Benderlink for EL v4-20080909
July 7, 2008 Revision: Benderlink for EL v4-20080707
June 19, 2007 Revision: Benderlink for EL v4-20070619
June 6, 2007 Revision: Benderlink for EL v4-20070606



OTHER PAGES