Benderlink Ethernet Module

The wireless device module kit configured for the Chiyoda or KEINS benders

The Benderlink wireless device module is used with benders that use the RS-232 protocol for communications.

Why is it needed?

Some benders require the legacy RS-232 protocol for communications. The device allows RS-232 signals to be converted into either encyrpted WiFi or WIRED TCP/IP signals. This overcomes the distance limitations inherent to RS-232 (max of 50 feet). RJ-45 cables transferring ethernet, have a distance limitation of over 300 feet between switches. Wireless distance limitations vary with the characteristics of the plant setup. A typical max distance for wireless is 100 to 150 feet.

Which Benders Use It?

Currently the benders that we can support using this module are:

• Chiyoda
• Keins
• MiiC
• Eaton Leonard (The EL benders require this device and an embedded computer.)

--Mcone 17:32, 28 July 2006 (EDT)