Difference between revisions of "Advanced Tubular Loopback Tester Software"

From ATTWiki
Jump to: navigation, search
(Loopback Wiring)
 
(12 intermediate revisions by one user not shown)
Line 1: Line 1:
 +
<table width=600>
 +
<tr>
 +
<td>
 
We've designed Loopback Tester software that is shipped with our RS-232 applications like Benderlink and the Benderlink Ethernet Modules.  It is designed to allow you to test RS-232 cables and connectors with only one computer using a loopback connector.  A "loopback connector" is a serial connector usually in DB9 form that loops various signals received in the connector back to the signals normally sent out from other computers.  This is how the loopback connector is wired:
 
We've designed Loopback Tester software that is shipped with our RS-232 applications like Benderlink and the Benderlink Ethernet Modules.  It is designed to allow you to test RS-232 cables and connectors with only one computer using a loopback connector.  A "loopback connector" is a serial connector usually in DB9 form that loops various signals received in the connector back to the signals normally sent out from other computers.  This is how the loopback connector is wired:
 +
</td>
 +
<td>
 +
[[image:loopback_passx3.jpg|300px|right]]
 +
</td>
 +
</tr>
 +
</table>
  
 
<br><br>
 
<br><br>
  
 +
__NOTOC__
 
==Loopback Wiring==
 
==Loopback Wiring==
  
<table cellpadding=10>
+
<table cellpadding=10 width=450>
 
<tr>
 
<tr>
<td bgcolor="#e3e4f5" width="200">INCOMING Signals</td>
+
<td bgcolor="#abbad1" width="200">INCOMING Signals</td>
<td bgcolor="#e3e4f5"></td>
+
<td bgcolor="#e3e4f5" width="50"></td>
 
<td bgcolor="#abbad1" width="200">OUTGOING Signals</td>
 
<td bgcolor="#abbad1" width="200">OUTGOING Signals</td>
 
</tr>
 
</tr>
Line 31: Line 41:
  
 
</table>
 
</table>
 +
* See also [[Loopback Adapter Wiring Specification]]
  
 
<br><br>
 
<br><br>
Line 36: Line 47:
  
 
We also use this software to test our Benderlink Ethernet Modules.  You can download and use this software for testing the modules also.  Here are a few images showing various states of the Loopback Tester software in action.
 
We also use this software to test our Benderlink Ethernet Modules.  You can download and use this software for testing the modules also.  Here are a few images showing various states of the Loopback Tester software in action.
 +
 +
==Loopback Off==
 +
 +
<table width=700>
 +
<tr>
 +
<td width=200>This screen shows the loopback software when it is not testing for loopback.</td>
 +
<td>[[image:loopback_off.jpg|400px]]</td>
 +
</tr>
 +
 +
</table>
 +
 +
  
 
==Loopback Complete Success==
 
==Loopback Complete Success==
Line 42: Line 65:
 
<tr>
 
<tr>
 
<td width=200>This screen shows all six lines are working.</td>
 
<td width=200>This screen shows all six lines are working.</td>
<td>[[image:loopback_passx3.jpg]]</td>
+
<td>[[image:loopback_passx3.jpg|400px]]</td>
 
</tr>
 
</tr>
  
Line 52: Line 75:
 
<tr>
 
<tr>
 
<td width=200>This screen shows that the TX-RX and RTS-CTS lines are good.  However, the DTR-DSR lines show a disconnect.  The total failure count is shown in the green LED text on the right.</td>
 
<td width=200>This screen shows that the TX-RX and RTS-CTS lines are good.  However, the DTR-DSR lines show a disconnect.  The total failure count is shown in the green LED text on the right.</td>
<td>[[image:loopback_passfail.jpg]]</td>
+
<td>[[image:loopback_passfail.jpg|400px]]</td>
 
</tr>
 
</tr>
 
</table>
 
</table>
Line 63: Line 86:
 
The most accurate way to test for TX-RX latency is to only test for the TX-RX lines like shown in this image.<br><br>
 
The most accurate way to test for TX-RX latency is to only test for the TX-RX lines like shown in this image.<br><br>
 
The current latency at 9600 baud (the rate the loopback software uses) is at 16 milliseconds in this sample run, which means that the unique character is returned over 60 times per second.</td>
 
The current latency at 9600 baud (the rate the loopback software uses) is at 16 milliseconds in this sample run, which means that the unique character is returned over 60 times per second.</td>
<td>[[image:loopback_passx1.jpg]]</td>
+
<td>[[image:loopback_passx1.jpg|400px]]</td>
 
</tr>
 
</tr>
 
</table>
 
</table>

Latest revision as of 15:18, 8 February 2011

We've designed Loopback Tester software that is shipped with our RS-232 applications like Benderlink and the Benderlink Ethernet Modules. It is designed to allow you to test RS-232 cables and connectors with only one computer using a loopback connector. A "loopback connector" is a serial connector usually in DB9 form that loops various signals received in the connector back to the signals normally sent out from other computers. This is how the loopback connector is wired:

Loopback passx3.jpg




Loopback Wiring

INCOMING Signals OUTGOING Signals
The RX (Receive pin) is jumped to the TX (Send pin)
The CTS (Clear to Send pin) is jumped to the RTS (Request to Send pin)
In many loopback connectors, the DSR (Data Set Ready) and DCD (Carrier Detect) are jumped to the DTR (Data Terminal Ready)



This forms a complete circuit for testing the original COM port, and all the important connectors and cable in between.

We also use this software to test our Benderlink Ethernet Modules. You can download and use this software for testing the modules also. Here are a few images showing various states of the Loopback Tester software in action.

Loopback Off

This screen shows the loopback software when it is not testing for loopback. Loopback off.jpg


Loopback Complete Success

This screen shows all six lines are working. Loopback passx3.jpg

Loopback Partial Success

This screen shows that the TX-RX and RTS-CTS lines are good. However, the DTR-DSR lines show a disconnect. The total failure count is shown in the green LED text on the right. Loopback passfail.jpg

Testing for Roundtrip Speed (or Latency)

It is possible to test the latency of the TX-RX lines. This test is run every time the loopback is running. The test is thorough because it sends 128 unique characters, but only checks for the return time of one of the characters. In order to complete a latency test, that unique character must eventually come back to the loopback software.

The most accurate way to test for TX-RX latency is to only test for the TX-RX lines like shown in this image.

The current latency at 9600 baud (the rate the loopback software uses) is at 16 milliseconds in this sample run, which means that the unique character is returned over 60 times per second.
Loopback passx1.jpg