VTube-LASER v1.96
Revision 1.96
|
ENHANCED: LASER Scan Handling is FASTER
The logic for handling incoming scan data is optimized to be faster than in previous versions. This creates less of a bottleneck during scanning - even when the point count is very high. |
ENHANCED: The Number of Maximum Stripes and Points Per Stripe Were Increased for the FARO LASER Scanner v6 Increased Output Capacities
This version of VTube can handle all the points that the v6 can send. |
NEW: Realtime Display of Scanned Points
This is the first version of VTube-LASER to display the points as it scans. Taking in scanned points is a very intense activity for the computer. So, built-in logic senses when the operator pauses input for a second, then draws a culled (reduced) set of points on the screen as representative of the entire cloud scanned. This feature works for both LASER and TACTILE measurements. This feature also works for SPLIT BEND scans. How To See Realtime Scanned Points'
|
ENHANCED: DRO Now Shows STRIPE Count AND Total POINT Count at the Same Time
Previous versions will only show the STRIPE count during laser scanning. |
ENHANCED: Point Labels Draw More Efficiently
The point labels and end labels now draw more efficiently than before in both VTube-LASER and VTube-STEP modes. Now they only draw after the orbit pauses. This makes orbiting much faster. Also, the label redraw logic was fixed during part load so that the user no longer has to manually redraw the part to fix the label positions. |
UPDATED: Chinese, Japanese, German, Spanish Translations Updated
All the language files are updated for VTube. This update includes the new button hints for buttons that have no captions. The GERMAN translation for the toolbar buttons is too wide, so only the GERMAN hints for thoses buttons displays. |
CRITICAL FIX: Split Bend Scanning for 180 Degree Bends
If you use split bend scanning then this is a critical update for you. A split bend measurement would not complete properly in UNISCAN mode. This has been repaired. |
FIX: Corrected Automatic Remeasure of the Straight After a Split Bend Measure
This has been repaired so that you can now safely follow the guide box suggestion of remeasuring the current straight. |
ENHANCED: The Measurement Complete Box Will No Longer Show the Alignment Choices If No Master Data Exists
When no master data exists, then there is nothing to align the measure tube to. In this case, the Measurement Complete window shows a message that explains that no alignment choices exists, and makes the alignment buttons invisible. This is the menu you would expect if you are reverse-engineering a part. |
ENHANCED: The UNISCAN a DIAMETER Control Allows You to Toggle the LASER Scanners
The toggle LASER button is now available for measuring diameters. This allows you to toggle from LASER to TACTILE style measurements on the fly.
|
ENHANCED: The Guide Messages During Measuring Are Improved for Claritys
The messages inside the tube measure control have been improved. For UNISCAN, it would say "measure 1 of 1" - which too vague. Now it reads the more helpful "Measure Straight then Press Red Button".
|
ENHANCED: Backup Mode Now Works with Both Laser STRIPES and TACTILE Points
FIX: Clearing a VTube project will also clear the Import Excel Grids in the Import Excel XLS Window
The grids in this menu were never cleared with the project clear. This has been fixed so that they clear to an empty grid.
|
Other Changes
|
Other
- Back to VTube-STEP
- Back to VTube Software Updates (for LASER Mode)
- Back to VTube-LASER
- See VTube Language Editor