VTube-LASER v1.54
Revision 1.54Back to VTube-LASER |
NEW - DRO: Digital Readout
The digital readout was added to give feedback for the arm motion and arm diagnostics. |
ENHANCED - Arm as Mouse Feature
The automatic "arm as a mouse" feature is enhanced so that the arm can be used as a mouse whenever a dialog displays on the screen - even in the middle of tube measurement. As soon as the dialog closes and measuring resumes, the arm as a mouse feature switches off.
|
ENHANCED - Automatic Clear Measure Process After End B Measure
Now the Measure Tube process automatically clears from the screen after the data from End B is collected |
NEW - Realtime Calculation of Intersection
Intersection points are calculated in realtime and displayed on the screen as orange points.
|
NEW - Realtime Calculation of Intersection Error
Each point is checked for a Maximum Intersection Error which is set in the Measuring 2 tab of the System Options menu. The default tolerance is 2mm, or 0.078 inches.
|
NEW - Code Signing of VTube.exe
The VTube program is now code signed in order to comply with the Microsoft Authenticode requirements.
|
NEW - Verified Bluetooth Compatible
VTube-LASER is verified to work with the FARO ScanArm Bluetooth connection. This allows connection to the FARO arms within 30 feet of the VTube-LASER computer without cables. |
ENHANCED - VTube-LASER Setup Files Include the FARO USB Setups
The VTube-LASER installation setup now includes the FARO USB drivers for either 32 or 64 bit computers. |
NEW - PDF Printer Driver Setup Included in Installation
Now every VTube-LASER installation can also install a PDF printer driver for easy output of inspection reports in the PDF format. This lets operators create historical fixed reports with static date/time for a record of qualification of the tube shape.
|
Other Pages
- Back to VTube-LASER