VTube-LASER v2.9.17
Version 2.9.17Release Date: January 2, 2019
|
NEW - Floating Measure Guide Window
The new Measure Guide window draws a small model of the part with the current section highlighted with a color band. This will help you visually identify which part of the tube to measure next. This feature has an on/off switch in Measure Setup / Other. Also, you can view the window at any time from inside Measure Process Measure a tube. |
|
In MultiScan ModeThe feature works for either UniScan and MultiScan. For UniScan, the entire straight is banded. For MultiScan, the tangents of the straights are banded. |
|
Resizable WindowThe window is resizable. |
|
Multi-monitor SupportThe Measure Guide window can be moved to other monitors. |
|
Measure Guide Window SetupSetup the window in the Measure Process / Measure Tube option. |
|
"Automatic Display of MASTER" OptionIn the Measure Setup - "Other" menu, use this option to indicate that VTube-LASER should automatically display the Measure Guide window when you are measuring tube shapes. |
NEW - Super fast AUTOBUILD PARAMETRIC Import of Solid Models
NEW - Scan Point Clouds into SOLIDWORKS
VTube-LASER now handles point clouds in storage we call "buckets." This allows you to scan anything into VTube-LASER - not just tubes. With this feature:
|
|
Scanning Test: Malibu Control ArmThis is a Malibu Control Arm that we scanned in VTube-LASER.
|
|
Send to SOLIDWORKSPress one button to transfer the scanned point cloud to SOLIDWORKS. The transfer takes about 5 seconds. |
|
Convert to SOLIDWORKS MeshUse the SOLIDWORKS features to turn the point cloud into a mesh and surface. (This requires a Professional or Premium license of SW.) |
NEW - VTube-LASER Now Automatically Resets Straight Count at Measure
VTube-LASER users are used to editing from a "0" for starting straight count to some positive value. You won't have to do that any more in this new version - because now VTube will just fill in the correct straight count for you. You can still change it manually at any time. |
NEW - Change Cylinder Fit Tolerances from a List of Setups
The new Cylinder Fit Tolerances Named Setup feature allows you to switch between stored cylinder fit tolerances for measuring cylinders. |
NEW - MAX Points for Cylinder Stripes Is Now 50
After extensive testing, we've concluded that any point count above 50 per stripe is never helpful in VTube-LASER. For example, as you approach 1000 points per stripe, it slows the math engine significantly and actually causes more Cylinder Fit problems than it solves. |
FIX - 180-degree Bend Correction Feature
This is important to you if you correct benders with 180-degree bends using Bender Setup communications. |
NEW- Auto Display of DRO (Digital Readout) When Moving from VTube-STEP to VTube-LASER
When the arm is connected to VTube, and the user changes from VTube-STEP to VTube-LASER, VTube now automatically displays the DRO window (Digital Readout). |
ENHANCED - PATH MANAGER - Clear Paths That No Longer Exist in the Path Manager
The new command allows you to clear paths that no longer exist in the list of Path Manager. |
ENHANCED - Configure the PATH MANAGER
Now you can configure the Path Manager without importing or loading any files. |
NEW - Radius 2 and Radius 3 after the Default Radius field in Part Setup
VTube has an added Radius 2 and Radius 3 fields in Part Setup and Bender Setup to allow for easier conversion to benders that require radius values assigned to levels (like Eaton Leonard and YSE) |
NEW - Collected Features Menu Fine-tuned with New Buttons (STEP Mode)
We found that users intuitively seek to use the Collected Features menu on the left of the screen to start the collection process. |
Other Changes
- For HTML reports, the screen-image bmp file is now only copied to the html export folder when it is present in the html report.
- In VTube-STEP, the export html report feature would display an error and would not save he html reports. This has been fixed.
- Auto disconnect without critical error or crash when FARO driver stops answering VTube-LASER's requests for information.
- A change allows for hardware keys (dongles) with serial numbers greater than 2.147 billion. Older revisions may not read new hardware key serial numbers properly if they exceed that value. This version addresses that issue.
- The Language Editor reloads from the main user interface much faster than previous versions.
- Optimized the STEP mode and LASER mode default settings to make VTube faster in its default state.
Other Pages
- See VTube-LASER Addata ZModem Communications Protocol for more information.
- Back to VTube-LASER
- Back to VTube Software Updates (for LASER Mode)
- See also VTube-STEP
- See also VTube-STEP Revisions
- See VTube-LASER Customer Support Page to download the latest version.
- See the tutorial on DCF - Dual Cylinder Fit
- See the tutorial on DCP - Diameter Cut Planes
- See VTube-LASER Cut Planes
- See How to Measure Tubes Attached to an Evaporator with the DCP Feature