Cable Spec 26

From ATTWiki
Revision as of 21:44, 5 January 2016 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

This is the wiring schematic for the Eaton Leonard style current loop cable.

Connector Hardware: 97 series connectors - 10 pin Amphenol Circular Male on both ends


Parts List

Connector

  • Amphenol Part Number 97-3106A-18-1P-ND
  • DDK Part Number: D/MS 3106A-18-1P
  • DDK Part Number: D/MS 3106B-18-1P (Is split backshell version)

Cable Clamp and Bushing

  • Amphenol Part Number: 97-3057-1010-1-ND
  • DDK Part Number: D/MS 3057-10A

Reducing Bushing

  • DDK Part Number: AN3420-8
  • Provides support for cable clamp on circular connector

Cable

  • 24 Gauge Twisted Pair, Shielded
  • Belden 9504 (pin-out is shown above)
  • Length – 10, 25, 50, or 100 feet typical (Make all cables 10 feet long unless specified differently.)


Currentloop 26 view1.png

Currentloop 26 view2.png

Cable Pinout

End A

 

End B

Red

A

Red/Black

B

White

C

White/Black

D

Green

E

Green/Black

F

Blue

G

Blue/Black

H

Shield

J


 

A

Red

B

Red/Black

C

White

D

White/Black

E

Green

F

Green/Black

G

Blue

H

Blue/Black

J

Shield