VTube-STEP Videos
|
Version 2.2 - July 16, 2015
Video Topic: SolidWorks to VTube to Bender - in 60 Seconds
See a demo of VTube importing a SolidWorks centerline and sending the data to a bender in 60 seconds. |
Version 2.1 - June 11, 2015
Video Topic: Unbending
See a demo of VTube unbending the tube with components attached to the straights. |
Version 1.97
Video Topic: Data Input Types
See a demo of VTube importing
|
Version 1.96
Video Topic: General Demo
Michael Cone, the developer of VTube-STEP gives you demonstration of the core features of VTube-STEP version 1.96. |
Version 1.94
Video Topic: Springback Compensation Tutorial
This video shows how calculate the anticipated bend angle springback and then compensate the bend setup to make the first part shape close to the nominal shape. |
Video Topic: Import Solid Model and Export to Chiyoda Bender
This video shows how to import a solid model and export the data to a Chiyoda Bender through Benderlink for Chiyoda. |
Version 1.92 - July 14, 2013
Video Topic: Import and Convert an Oval Tube to Send to an Alpine M4 Bender Control
This video shows how to import and calculate the centerline of an oval tube and then send the data directly to a Alpine M4 bender. |
Video Topic: Import and Convert an Oval Tube to Send to CSM M3 Bender Control
This video shows how to import and calculate the centerline of an oval tube and then send the data directly to a CSM M3 bender. |
|
Video Topic: Convert Supravision File to a Spreadsheet File that can be Imported to an Eaton Leonard Laservision Tube Measuring Center
This video shows how to convert a Supravision file to a Laservision Spreadsheet file for import into an Eaton Leonard Laservision tube measuring center. |
|
Version 1.87 - February 18, 2013
Video Topic: Automatically building a SolidWorks tube from VTube
This short video shows how to build a parametric tube in SolidWorks from VTube. |
Version 1.84 - December 6, 2013
Video Topic: Collecting Multiple Surfaces in a Single Straight
This video shows how to collect multiple surface patches in a single straight in order to collect the surface data in an entire straight. |
Version 1.83 - July 29, 2013
Video Topic: Entering Tube Print Data To Establish the Master Data
This video shows how to enter data from a tube print in order to establish the master part data in VTube-LASER v1.83. Many of the steps apply to VTube-STEP mode, so the video is included here. | ||
This video shows how to import a new XLS language file into VTube-STEP or VTube-LASER 1.83. |
Version 1.81.4 - March 28, 2012
Video Topic: How to Change Languages
This short video shows how to change the language in the VTube user interface. |
|
Video Topic: How to Use the Language Editor
How to edit any language for the VTube user interface using the VTube Language Editor or Microsoft Excel. |
|
Version 1.80 - November 23, 2012
How to extract a tube centerline of demo part 2 with VTube-STEP version 1.80. Note that this part has a 180 degree bend - which requires special steps for import anc calculation. |
Version 1.76.4 - April 20, 2012
How to extract a tube centerline with VTube-STEP. |
Version 1.76 - March 15, 2012
Unbending a tube with coping at either end. (Pro and LASER License Level) |
Version 1.75 - February 2012
Converting an IGES file to CSM or Alpine bender data format |
|
Solid Model Import of Large Diameter Tube |
|
How to demonstrate VTube importing the demo CAD model |